Synthetic Multi-Purpose Grease, NLGI #2 (GLC)

Package sizes include:

8-oz. Tube
8-oz. Tubes (case of 12)
14-oz. Cartridge
14-oz. Cartridges (case of 10)
14-oz. Cartridges (case of 40)
35-lb. Lug
120-lb. Keg
400-lb. Drum

PRODUCT DESCRIPTION
AMSOIL Synthetic Multi-Purpose Grease grade #2 is recommended in manual or automatic lubricating systems.

NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, wet environments and wheel bearings and other automotive applications.

The correct consistency grade of AMSOIL Synthetic Multi-Purpose Grease is recommended in heavy and light duty applications found in manufacturing plants, automobiles, agricultural and construction equipment.

These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings, chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL Synthetic Multi-Purpose Greases are suitable for use up to 350 degrees F. When operating at elevated temperatures, frequent regreasing may be required.

AMSOIL Synthetic Multi-Purpose Greases are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Multi-Purpose Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.

PERFORMANCE FEATURES

• High dropping point of 500^°F+
• Resists thermal and oxidation degradation
• Excellent water-washout resistance
• Good low temperature pumpability and torque values
• Adhesive and shear stable to prevent squeeze out

Applications or Requirements

• GLC (#2) ASTM D-4950 (NLGI) Service GC/LB
• GLC (#2) Cincinnati Milicron P-64 Spec
• GLC (#2) Mack MG-C

APPLICATION RECOMMENDATION
AMSOIL GLC Greases grade #2 is recommended for use in manual or automatic lubricating systems. NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, wet environments. and is the primary choice for wheel bearings.

The correct consistency grade of AMSOIL GL multi-purpose greases are recommended for use in heavy and light duty applications found in manufacturing plants, automotive applications, agricultural equipment and construction equipment. These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings. chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL GL greases are suitable for use up to 350 F When operating at elevated temperatures, frequent regreasing may be required.

AMSOIL GL Lithium Complex Greases are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of the GL grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.

APPLICATION MAINTENANCE
Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fitting clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Do not over-grease, as excessive heat buildup can result. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.