2000 GMC SLE, 5.3L, 2WD
Submitted by AMSOIL Customer Richard Hoefle

Two 90° elbows were used on the oil filter plate to get the oil lines straight up to the filter adapter. I went inside the electrical box and made a backer plate and the outer plate was mounted through the electrical box tower and the backer plate for strength. The oil filter adapter plate was then mounted on the electrical tower. I put two L-brackets on the sides of the electrical box just in case I would need to run a piece of stainless tubing over to the fender well for added strength So far the weight of the filters have not bothered the electrical tower at all. With just a little fabrication the system was easy to install. I am looking forward to my fist oil analysis.

Photo 1	Photo 2
Photo 3	Photo 4
Photo 5