AMSOIL By-Pass Filter Installation

1995 Harley Davidson FLHT Electra Glide
AMSOIL Dual Remote By-Pass Filter System
Submitted by AMSOIL Dealer Jimmy VanSise

Special Instructions:
Enclosed are pictures of the BMK-11 by-pass mounted on my 1995 Harley Davidson FLHT Electra Glide. I mounted the Billett aluminum bracket to the crash bar, as shown in picture. Everything included in the kit was used. A few 90 degree fittings were purchase separately and I reintroduced the oil back thru the oil filler, as shown in picture. I drilled through the rubber and removed the dip stick and trimmed the ball end to allow the oil back into the system. Below is a picture of a Cool Collar ordered thru J.C Whitney, Part #47UF0800Y, which fits perfectly over the filter allowing it to also become an oil cooler. This has been installed on my motorcycle since 6/5/03 and I have approximately 4,000 miles on the AMSOIL 20W-50 motorcycle oil and AMSOIL SMF135C oil filter (on engine) with no problems.

Installation Photos - Click On Photos For Larger Image
 

Back To By-Pass Filter Installation Index

By-Pass Parts Identification List

See the AMSOIL By-Pass Filter Main Product Page

Disclaimer: These installation examples have been submitted by sources independent of AMSOIL INC. and may not comply with AMSOIL INC. installation instructions or application recommendations.

AMSOIL Also Offers These Products

AGGRAND Natural Fertilizer ALTRUM Vitamins Oil Analyzers TRICO Wiper Blades Mother's Cleaning Products NGK Spark Plugs WIX Filters Donaldson Filters MANN Filters AMSOIL YouTube AMSOIL Twitter AMSOIL Events AMSOIL Corp

Order Fax Line: (715)392-5225
Product Technical Services: (715)399-TECH