Personal Watercraft

Synthetic Two Cycle Motor Oils
INTERCEPTOR™ (AIT)
A high-performance two-cycle oil with a performance emphasis on exhaust power valves. Excellent for all types of personal watercraft and jet boats requiring an API TC oil. Contains high levels of detergent additives to prevent valve sticking. High quality replacement for manufacturer branded oils. Injector use or 50:1 pre-mix.

DOMINATOR™ (TDR)
Premier racing two-cycle oil with performance directed specifically toward racing and/or modified recreational engines. Contains higher viscosity oils and special additives which provide the higher temperature protection required in competition equipment. Not recommended for long term use in stock engines used for recreational purposes.

HP Injector™ (HPI)
Preferred recommendation for PWC and jet boats that require a TC-W3 oil. Very good for non-power valve equipped PWC engines. Injector use or 50:1 pre-mix.

Saber™ Outboard (ATO)
Designed for pre-mix TC-W3 applications as lean as 100:1 ratios. Saber™ oils improve throttle response, lower or eliminate smoke, minimize deposit formation and lower emissions. Saber™ Outboard has a performance emphasis on the cooler operations of water-cooled motors. May be used at richer mix ratios where desired.

Synthetic Four Cycle Motor Oils
Formula 4-Stroke® Synthetic 10W-30 (WCT)
Formulated specifically for use in 4-stroke gasoline fueled engines used in marine applications. Offers unsurpassed wear protection, viscosity stability, low volatility and excellent rust protection. NMMA FC-W approved and “Warranty Certified”. Recommended for use in 4-stroke outboard motors including Honda, Yamaha, Mercury, Suzuki, Johnson-Evinrude (BRP), Nissan and Tohatsu. Excellent for use in marine inboard engines including Mercury (MerCruiser), OMC, Volvo-Penta, Crusader, Marine Power, GM, Ford and Chrysler. Recommended for use with personal water craft (PWC) including Sea Doo (BRP), Honda, Yamaha and Polaris.

Formula 4-Stroke® Synthetic 10W-40 (WCF)
Formulated specifically for use in 4-stroke gasoline fueled engines used in marine applications. Offers unsurpassed wear protection, viscosity stability, low volatility and excellent rust protection. NMMA FC-W approved and “Warranty Certified”. Recommended for use in 4-stroke outboard motors including Honda, Yamaha, Mercury, Suzuki, Johnson-Evinrude (BRP), Nissan and Tohatsu. Excellent for use in marine inboard engines including Mercury (MerCruiser), OMC, Volvo-Penta, Crusader, Marine Power, GM, Ford and Chrysler. Recommended for use with personal water craft (PWC) including Sea Doo (BRP), Honda, Yamaha and Polaris.

Formula 4-Stroke® Power Sports 0W-40 (AFF)
A secondary recommendation but perfect for extended season applications . Perfect for the consumer that has a variety of power sports equipment but only wants to buy one oil. Specially formulated for four-stroke recreational motors. Reduces wear. Wet clutch compatible. Contains no friction modifiers. Broad viscosity range makes it excellent for use in both hot and cold weather conditions.

Oil Filters
AMSOIL EaOM Motorcycle/PWC Oil Filters (EaOM)
AMSOIL Ea Motorcycle/PWC Oil Filters are made with premium-grade components. They feature advanced full synthetic nanofiber technology, making them the highest efficiency filters available for the power sports market.

Greases and Coatings
Synthetic Water Resistant Grease (GWR)
Resists water washout and degradation. Unparalleled protection for bearings and other components frequently exposed to water. Stays in place, lubricates and protects against rust.

Series 2000 Synthetic Racing Grease (GRG)
Ultimate protection for hard-driven, high-performance PWC. Dramatically reduces friction and wear for improved performance. Excellent high temperature performance. Outperforms other conventional and synthetic greases.

Synthetic Multi-Purpose Grease (GLC)
Reduces friction and wear in high-speed, high-temperature components such as anti-friction bearings. Keeps components running clean and trouble free for outstanding performance and long life. NLGI #2 is the primary wheel bearing recommendation. NLGI#1 Multi-Purpose Grease is also available in a convenient spray formulation, which is ideal for greasing hard-to-reach equipment such as hinges, springs and other common applications.

MP Heavy-Duty Metal Protector (AMH)
A heavy-duty spray lubricant fortified with special rust and corrosion inhibitors. Penetrates and adheres to metal surfaces, leaving a long-lasting protective coating. Apply MPHD to any metal surface that requires a heavy-duty lubricant or is exposed to the damaging effects of salt, moisture or chemical corrosion. Works as an undercoat, leaving a wax-like film.

MP Metal Protector (AMP)
Displaces water and protects metal surfaces from rust and corrosion. Provides a light lubricant film. Excellent for use on hinges, light duty pivot points, squeaky mechanical joints, electrical systems and more. Penetrates existing rust buildup. Also dries wet electrical systems.

Silicone Spray (ALS)
Perfect for lubricating nonmetal surfaces that contact with metal, nylon, fiberglass or plastic surfaces. Special non-staining formula.

Gasoline Fuel Additives
Series 2000 Octane Boost (AOB)
Maximizes power and improves performance in all two-cycle and four-cycle gasoline engines.  Increases octane number up to seven points.  Reduces engine knock, improves ignition and engine response, helps fuel burn cleaner and inhibits corrosion.  Recommended for off-road and racing use.

Gasoline Stabilizer (AST)
Reduces the oxidation process that occurs when fuel is stored for extended periods to prevent the formation of varnish and sludge which can clog carburetors, injectors, stick floats and cause poor engine performance. Ideal for pre-storage maintenance.

Fogging Oil (FOG)
A highly effective rust preventative designed to protect internal engine components during storage or long periods of inactivity. Ideal for all PWCs with either a two or four-stroke engines.

Appearance Products
Mothers® Polishes, Waxes and Cleaners
Airborne contaminants, corrosive pollutants and harsh environmental conditions can all contribute to the premature aging of a car's paint. Regular washing and waxing can easily make the difference between a long lasting, luminous glow, or a dull, dumpy finish. Proper PWC maintenance involves cleaning paint and keeping it clean, which is a much smarter choice, in the long run, than trying to repair distressed, damaged paint. Mothers® offers a unique and wide product line that includes everything needed to clean, polish and care for your PWC.

AMSOIL Miracle Waterless Wash and Polish Spray (AMW)
This unique dry car wash and polish delivers outstanding performance and quick, easy and economical spray application. No water required. It’s simply the fastest way to clean your PWC.

Additional Products
NGK Spark Plugs for Power Sports
Original equipment on most of today’s Personal Watercraft, these spark plugs provide exceptional performance and durability.