AMSOIL Diesel Injector Clean + Cold Flow (DFC) combines the superior
deposit-removing properties of AMSOIL Diesel Injector Clean and the
excellent anti-gelling properties of AMSOIL Diesel Cold Flow in one convenient
package. It is designed for all types of diesel engines, including
high-pressure common-rail designs. Unlike all-in-one fuel additives
that may sacrifice performance in specific areas in the name of convenience,
AMSOIL Diesel Injector Clean + Cold Flow makes no sacrifices;
it is purpose-built for diesel owners who demand maximum results.
Restores Horsepower & Improves Fuel Economy
Fuel injector deposits interrupt spray patterns, causing poor fuel atomization, incomplete
combustion, excessive emissions and smoke. High-pressure common-rail fuel
systems are becoming commonplace as vehicle manufacturers attempt to produce
more power while still meeting tightening emissions standards. In high-pressure
common-rail systems, injection pressures near 30,000 psi atomize the fuel into a fine
mist for more efficient combustion, yielding increased power and fuel economy while
reducing emissions. To maintain these high pressures, injector assemblies are highly
engineered, with clearances as tight as 1-3 microns (a human hair is typically 70-100
microns thick). Even minimal internal diesel injector deposits on the injector pintal or
other components can lead to sticking and even seizure, reducing power, fuel economy
and operability. Traditional additive chemistry is not designed to address these
AMSOIL Diesel Injector Clean + Cold Flow features advanced chemistry that delivers
concentrated strength to target internal diesel injector deposits and traditional carbonaceous
deposits, restoring horsepower and operability to like-new condition and
improving fuel economy up to 4.5 percent. Acceleration is improved and, with regular
use, AMSOIL Diesel Injector Clean + Cold Flow continues to enhance performance by
keeping injectors clean. The net savings on fuel can result in no additional cost
Lubricates Fuel Pump and Injectors
Ultra-low-sulfur diesel fuel (ULSD) has significantly reduced lubricity - a critical property
in controlling wear in fuel pumps and injectors. AMSOIL Diesel Injector Clean +
Cold Flow adds back the lubricity the fuel pump and injectors need, improving service
life, while saving time and money on maintenance costs.
Helps Prevent Gelling
As the temperature drops, the wax naturally found in diesel fuel begins to crystallize.
The point at which wax crystals form is known as the cloud point. These wax crystals
eventually clog the fuel filter and starve the engine of fuel, preventing it from starting.
While low-quality fuels may form wax crystals in temperatures as warm as 40ºF (4ºC),
most fuels have a cloud point near 32ºF (0ºC). The point at which the crystals clog
the fuel filter is known as the cold filter-plugging point (CFPP). AMSOIL Diesel Injector
Clean + Cold Flow lowers the CFPP by up to 20ºF (15ºC) in ULSD.
- Cleans dirty injectors
- Adds lubricity to reduce fuel-pump & injector wear
- Improves fuel economy up to
- Disperses water to control ice formation & prevent gelling
- Improves diesel cold-flow ability
by up to 20ºF (15ºC)
AMSOIL Diesel Injector Clean + Cold Flow's powerful formula
cleans fuel injectors and piston rings for improved combustion
and better sealing. It minimizes soot generated from incomplete
combustion and helps keep soot out of the crankcase, reducing
soot-related wear and motor oil viscosity increase.
Reduces Need for #1 Diesel Fuel
Using #1 diesel fuel is one traditional solution to cold-weather
diesel fuel problems. While #1 diesel fuel has an advantage in
low-temperature operability, the energy content of #1 diesel fuel
is about 95 percent that of #2 diesel fuel, resulting in reduced
fuel economy and less horsepower. In addition, the kerosene
used in #1 diesel fuel provides less lubrication for the fuel pump
and fuel injectors, increasing the likelihood of wear. AMSOIL
Diesel Injector Clean + Cold Flow minimizes the need for blending
standard #2 diesel fuel with lower-quality #1 diesel fuel,
helping to maintain fuel economy and keep engines functioning
AMSOIL Diesel Injector Clean + Cold Flow is recommended for
use with all types of heavy- and light-duty, on- or off-road and
marine diesel engines. Use maintenance dose for regular treatment.
Add before filling tank. AMSOIL Diesel Injector Clean +
Cold Flow must be added at temperatures above the diesel fuel
cloud point (the temperature at which wax begins to crystallize).
It will not reverse gel or wax crystals once formed. Do not
store at temperatures below 0ºF (-18ºC). Excellent for use with
AMSOIL Diesel Cetane Boost.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty.
For complete information visit www.amsoil.com/warranty.aspx.
Fuel Injector Pintal||Traditional Fuel Injector Pintal|
|Fuel injectors in high-pressure common-rail diesel engines use smaller,
highly engineered components to produce the higher fuel pressures
needed for improved combustion. The tighter clearances invite internal
diesel injector deposits that interfere with injector needle actuation,
reducing performance. External deposits can also form on the injector nozzle (the typical trouble spot for traditional injectors). While many
other fuel additives have yet to catch up to the internal diesel injector
deposit problem, AMSOIL Diesel Injector Clean targets deposits
wherever they form, maximizing power, fuel economy and performance
in high-pressure common-rail and traditional diesel engines.|
For detailed typical technical properties, download the product data bulletin.