- Outstanding cold-temperature pumpability
- Excellent mechanical stability
- Superior protection against wear and corrosion
- Long service life
- Withstands high loads and pressures
AMSOIL Arctic Synthetic Grease is recommended for industrial machinery, heavy-duty
automotive and industrial equipment, chassis, bearings, off-road and heavy
equipment operating in arctic climates.
AMSOIL Arctic Synthetic Grease is compatible with many other types of greases.
However, it is recommended that when changing greases, the equipment be
cleaned of the old grease when possible or flushed with a liberal amount of Arctic
Synthetic Grease while the mechanism is in operation. Closely monitor the system
for any inconsistencies. Grease compatibility questions should be referred to your
AMSOIL representative or AMSOIL INC.
AMSOIL PRODUCT AVAILABILITY
AMSOIL Arctic Synthetic Grease is available in
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended
application and according to the recommendations in the Material
Safety Data Sheet (MSDS). An MSDS is available via the Internet at www.amsoil.com
or upon request at (715) 392-7101. Keep Out of Reach of Children. Don’t pollute.
For warranty information, visit www.amsoil.com/warranty.aspx.
Technical Properties - Arctic Synthetic Grease (GEC)|
|Thickener||calcium sulfonate complex|
|NLGI consistency grade||1|
(25°C [77°F], 0.1 mm) worked 60 strokes (ASTM D217)||310-340|
|Operating Range, °F (°C)||-75 to 315 (-59 to 157)|
|Four-ball wear test, mm scar (ASTM D2266)||0.51|
|Four ball EP, kgf (ASTM
Load wear index
|Timken OK load test, lbs
|Low-temperature torque, N•m (ASTM D4693)|
(-40°C [-40°F]) (Starting, Running torque)
|LT-37 US Steel Mobility @ 0°F (g/min)||156.5|
|US Steel Mobility @ -20°F (g/min)||81.5|
|Dropping point, °F (°C)
(ASTM D2265)||>550 (>288)|
|Rust and corrosion (ASTM
|Oil viscosity, 40°C (104°F), cSt (ASTM D445)||22.30|
|Viscosity Index (ASTM D2270)||125|