DOMINATOR Racing Grease is engineered with extreme-pressure additives to deliver
excellent wear protection in heavily loaded, high-speed racing applications. Its
high-performance anti-wear additive package helps ensure long component life.
Because it effectively reduces friction, DOMINATOR Racing Grease not only inhibits
wear, it also maximizes power through-put and fuel efficiency. Its superior friction-reduction
properties help ensure race vehicles operate at peak performance.
Although DOMINATOR Racing Grease is specially formulated for high-temperature/high-speed applications, it also delivers superior protection for low-speed bearings,
providing racing components with the exceptional load-bearing capacity of a heavy-duty
DOMINATOR Racing Grease pairs a high-viscosity-index synthetic base oil with a
top-quality lithium complex thickener known for its extraordinary performance in
temperature extremes. It offers excellent low-temperature pumpability and high-temperature
consistency for dependable protection in all temperatures.
Resists Oxidation, Corrosion & Washout
DOMINATOR Racing Grease contains a robust package of oxidation inhibitors,
helping prevent grease breakdown and component surface damage. Its excellent
adhesion and cohesion properties allow it to resist water washout during operation
in wet conditions. A premium blend of corrosion inhibitors further protects against
rust and corrosion formation.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended
application and according to the recommendations in the Material
Safety Data Sheet (MSDS). An MSDS is available via the Internet at www.amsoil.com
or upon request at (715) 392-7101. Keep Out of Reach of Children. Don’t pollute.
For warranty information, visit www.amsoil.com/warranty.aspx.
Synthetic Lithium Complex Racing Grease||DOMINATOR Synthetic Racing Grease||NLGI
(ASTM D 217) 25° C [77° F], 0.1 mm Worked
Point (ASTM D 566) °C [77° F]||288
Temperature Life (ASTM D 3527) hours||100||80
Washout (ASTM D 1264) 79° C [175° F] % loss||5.0||15
Spray Off (ASTM D 4049), % max||18.0||NR*|
|Rust and Corrosion (ASTM D 1743)||pass||pass|
Separation (ASTM D 1742) 24 hr. @ 25° C
[77° F], % loss||2.8||10
|Leakage (ASTM D 4290), g*||5.0||10 max|
|Four-Ball Wear Test , mm scar (ASTM D 2266)||0.52||0.9
|Four-Ball EP, kgf (ASTM D 2596)|
Load Wear Index
OK Load Test (ASTM D 2509), lbs.||60||NR*|
Wear (ASTM D 4170) mg*||8.5||10
Temperature Torque (ASTM D 4693) n·m, max
@ -40° C [-40° F]||7.2||15.5|
with Moly Compound||No||NR*|
with other greases||Excellent||NR*|
Compatibility (ASTM D 4289)|
durometer-A points, GC
durometer-A points, LB
NR: Not Required for NLGI GC or LB labeling|