AMSOIL High-Viscosity Synthetic Grease is a lithium-complex-thickened
grease blended with premium ISO 320 synthetic base oils. It is
fully compounded with additives, providing superior extreme-pressure
protection, oxidation resistance and corrosion protection. AMSOIL High-Viscosity Synthetic Grease is shear stable, maintaining its viscosity and
consistency in the presence of mechanical activity. It also stays in place
by resisting water washout. During high-temperature operation, AMSOIL
High-Viscosity Grease’s base oils resist thermal breakdown, providing
a thick film for excellent protection. AMSOIL High-Viscosity Synthetic
Grease adheres to critical components in severe conditions to promote
optimum operation, resulting in increased uptime and reduced repair
and maintenance costs.
AMSOIL High-Viscosity Synthetic Grease is excellent for use in heavy-duty industrial
and off-road applications where equipment operates under adverse conditions,
including exposure to environmental elements, slow, heavily loaded applications and
shock-loading conditions. Its lithium-complex thickener system, high-viscosity base
oil and high-quality additives perform in hostile environments and extreme applications
where typical multi-purpose greases may not.
Resists Water Washout
AMSOIL High-Viscosity Grease is formulated with excellent cohesion and adhesion
properties that help it resist water washout. It stays in place longer, resulting in
reduced maintenance time. Protects Against Oxidation and Corrosion
AMSOIL High-Viscosity Grease contains a robust package of oxidation inhibitors
that helps prevent grease breakdown and component surface damage. A premium
blend of corrosion inhibitors further protects components against rust and corrosion
Excels in High Temperatures
AMSOIL High-Viscosity Grease is engineered for exceptional performance in high-temperature
applications. Its premium ISO 320 synthetic base oil and high-quality
lithium-complex thickener work together to provide superior protection in severe
operating conditions (up to 177˚C (350˚F) in continuous service and up to 204˚C
(400˚F) in intermittent service).
Maintaining a clean work environment is important when equipment
greasing is performed. Wipe grease fittings clean prior
to injecting grease to prevent contaminant ingestion. Maintain
bearing housings one-third to one-half full of grease. Prevent
over-greasing as this can result in excessive heat buildup.
Supplement standard grease maintenance by periodically
cleaning and packing housings with fresh grease on an
established maintenance schedule.
AMSOIL High-Viscosity Synthetic Grease is compatible with
many other types of greases. However, it is recommended
that when changing greases, the equipment be cleaned of the
old grease when possible or flushed with a liberal amount of
AMSOIL High-Viscosity Synthetic Grease while the mechanism
is in operation. Closely monitor the system for any inconsistencies.
Grease compatibility questions should be referred to your
AMSOIL representative or AMSOIL INC.
AMSOIL High-Viscosity Lithium-Complex Synthetic Grease is
available in 14-oz. cartridges, 35-lb. pails, 120-lb. kegs.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty.
For complete information visit www.amsoil.com/warranty.aspx.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended
application and according to the recommendations in the Material
Safety Data Sheet (MSDS). USA and Canada (M)SDS are available upon request at 715-392-7101 or on the AMSOIL Website. Keep Out of Reach of Children.
High-Viscosity Lithium-Complex Synthetic Grease (GVC)
|Worked Penetration (ASTM
|Dropping point, °C (°F) (ASTM
|Rust (ASTM D1743)||Pass|
|Timken OK Load, lbs. (ASTM
|Four-Ball EP Weld Point, kg. (ASTM D2596)||315|
|Water Washout, % loss (ASTM D1264)||2.5|
|Base Oil Viscosity, cSt @ 40˚C (ASTM D445)||325|
|Copper Corrosion (ASTM D-4048)||1B|
|Oil Separation, % weight loss (ASTM D1742)||1.5 max.|
|Four-Ball Wear, mm (ASTM D4170)||0.52|