AMSOIL Synthetic AW Series Anti-Wear Hydraulic Oils are shear-stable,
long-life lubricants based on high-quality synthetic oil technology.
These oils are formulated with a premium additive system that inhibits
oxidation to help prevent acid formation and viscosity increase and inhibit
rust and foam (providing smooth hydraulic operation). AW Oils
contain a very effective zinc-based anti-wear/antioxidant additive which
controls wear in high-speed, high-pressure vane and gear pumps while
meeting the lubrication requirements of axial piston pumps with bronze-on-steel metallurgy. Improved pump efficiency can increase hydraulic
power, reduce fuel consumption and improve productivity. AW Oils
are designed for long life and can typically reduce maintenance costs
by extending drain intervals and reducing labor costs, repairs and
AMSOIL Synthetic Base Oil Technology
AMSOIL synthetic base oils resist thermal and oxidative
breakdown, reducing varnish deposits. The very high viscosity
indices, low pour points and lack of paraffins (wax) make
these good all-season lubricants well-suited for high and low
temperature extremes. At high temperatures and pressures,
AMSOIL AW Series Oils provide a good lubricating film and
protect components against wear. During cold-temperature
operation, equipment starts easier and the need for preheating
with sump heaters is reduced. The AW Series base oils also
readily separate from water, preventing oil/water emulsions that
inhibit lubrication and allowing for longer lubricant life
and easier water drainage from the sump.
- Antiwear protection for high-pressure systems
- Recommended for gear, vane and piston pumps
- Contain rust, oxidation and foam inhibitors
- Designed for extreme-temperature operation
- Hydrolytically stable and readily separate from water
The correct viscosity grades of AMSOIL Synthetic AW Series
Anti-Wear Hydraulic Oils are recommended for high- and low-pressure
gear, vane and piston stationary and mobile hydraulic
systems. They are excellent for general-purpose use where
extended drain intervals are desired and in severe-duty
operations where temperature extremes are encountered.
AMSOIL AW Series Oils are compatible with hydraulic system
seals, petroleum hydraulic oils and most synthetic hydraulic
oils*. For optimum performance, it is recommended the system
be thoroughly drained and, if warranted, cleaned prior to
installation. Oil analysis is recommended to maximize oil drain
* Not compatible with phosphate ester, silicone or water-based fluids.
AMSOIL recommends the Synthetic AW Series Hydraulic Oils for use where the following specifications are required:
- Denison HF-0, HF-1 and HF-2
- Vickers M-2950-S and I-286-S
- Cincinnati Milacron P-68, P-69 and P-70
- U.S. Steel 127
- Racine, variable volume vane pumps
- DIN 51524, Parts 2 and 3 HLP22-HLP46
- SEB 181222 HLP22-HLP68
- ASTM D-6158 HV
- AFNOR E 48-603*
- Ford M6C32
- GM LH-04-1, LH-06-1 and LH-15-1
- Lee Norse 100-1
- Jeffrey No. 87
- BF Goodrich 0152
- Commercial Hydraulics*
* Except for PM-500 series silver-containing pumps which require R&O additive systems.
AMSOIL PRODUCT AVAILABILITY
AMSOIL industrial lubricants are stocked in Superior, Wisconsin
and in select regional distribution centers throughout the United
States and Canada. AMSOIL will stock additional quantities
of lubricants or special-order products based on customer
requests and regional demands.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty.
For complete information visit www.amsoil.com/warranty.aspx.
HEALTH & SAFETY
This product is not expected to cause health concerns when
used for the intended applications and according to the recommendations
in the Safety Data Sheet (SDS). An SDS is available
online at www.amsoil.com or upon request at (715) 392-7101.
Keep Out of Reach of Children.