High-quality motor oil is critical for maximum performance in modern
two-stroke marine motors. Direct fuel injection (DFI) improves combustion
efficiency, delivering the extra power enthusiasts want, while leaner
gas-to-oil ratios provide the reduced exhaust emissions the government
mandates. The leaner ratio leaves less oil to lubricate and protect
these hotter, more powerful motors, which invites deposits and wear that
threaten engine performance and life. HP Marine is proven to excel in
these harsh conditions. It controls performance-robbing friction, heat
and wear, yet produces low smoke and has low aquatic toxicity properties.
It's an oil as advanced as the engines it protects.
- Excellent for Evinrude® E-TEC™ factory-lean setting (replaces Evinrude XD100™ 2-Cycle Oil)
- Helps prevent deposits
- Protects against wear
- Low smoke
- Protects against rust
- Low aquatic toxicity
- Superior performance as an injection oil or at 50:1 pre-mix
Outstanding Wear Protection
The elevated heat and friction of modern two-stroke marine motors can exceed the
film strength of inferior oils, increasing the likelihood of scuffing and wear. HP Marine's
exclusive synthetic formulation provides increased lubricity for reduced wear during
normal and lean-mix operation (see field study results). In 534 hours of field testing,
HP Marine completely prevented piston skirt and cylinder bore scuffing, demonstrating
its superior lubricity and ability to reduce friction between moving parts. It maintains
a strong lubricating film even in lean-mix, severe-service conditions, helping marine
engines achieve maximum life.
Excellent Deposit Control
HP Marine is formulated with MAXDOSE™, a system of advanced additives for
"super-clean" operation. It helps prevent deposits that lead to poor performance.
In field testing, HP Marine inhibited ring deposits that can cause ring sticking and
ring jacking (carbon build-up behind the ring, forcing it outward), a phenomenon
that occurs in modern DFI outboard motors. It also virtually eliminated exhaust port
deposits for reliable, efficient operation.
Proven in Marine E-TEC Field Study
HP Marine was installed in a 250-hp Evinrude E-TEC
engine powering a heavy-duty marine rescue vessel.
Following a 28-hour break-in period at the normal oil
setting, the engine was programmed to its factory-lean
setting and operated for 506 hours prior to
disassembly. An ASTM calibrated rater examined
and awarded each component either a merit
rating on a scale of 0 to 10 (with 10 representing
no distress) or a percentage rating (with 0 percent
representing no distress). Results prove HP Marine
provided exceptional wear protection and deposit
control. For complete study results, visit amsoil.com/proof.
HP Marine™ is recommended for use in all two-stroke outboard
motors including, but not limited to, Johnson® and Evinrude®
FICHT® & E-TEC™ (replaces XD100™ 2-Cycle Oil); Mercury® EFI & Optimax®; Yamaha®; Nissan® and Tohatsu® TLDI®; Suzuki®;
Mariner® and Force®. It is also recommended for use in all two-stroke
personal watercraft (PWC). Use as injection oil or as 50:1
pre-mix (2.6 oz. per U.S. gallon of gas) where NMMA TC-W3 or
API TC oils are specified. Compatible with mineral and synthetic
TC-W3-type two-stroke oils; however, mixing two-stroke oils
should be minimized.
HP Marine Synthetic 2-Stroke Oil is Warranty
Secure, keeping your factory warranty intact.
HP Marine is a high-performance replacement
for vehicle manufacturer-branded products and is also backed
by the AMSOIL Limited Warranty (G1363). For details, visit www.amsoil.com/warrantysecure.
HEALTH & SAFETY STATEMENT
This product is not expected to cause health concerns when
used for the intended applications and according to the recommendations
in the Safety Data Sheet (SDS). An SDS is available
online at www.amsoil.com or upon request at (715) 392-7101.
Keep Out of Reach of Children. Recycle used oil and bottle.
HP Marine Synthetic 2-Stroke Oil (HPM)
Viscosity @ 100°C, cSt (ASTM D445)
Viscosity @ 40°C, cSt (ASTM D445)
Viscosity Index (ASTM
°C (°F) (ASTM D97)
°C (°F) (ASTM D92)
Fire Point °C (°F) (ASTM
ASTM Brookfield Viscosity @ -40°C (°F), cP
NMMA TC-W3® Rust Test
Jaso M 342-92 Smoke Test (FD).
TC-W3 Lubricity Test (ASTM D4863)
OECD - Guideline 203, Fish
Acute Toxicity Test .
|100% Survival Rate|
OECD - Guideline 202, Daphnia
Acute Immobilization Test
|100% Survival Rate|
DANGER: harmful or fatal if swallowed. Contains
synthetic lubricant and petroleum distillates.
If swallowed do not induce vomiting. Contact
a physician immediately. Keep away from
fire, heat and open flame. Use with adequate
ventilation. Avoid frequent or prolonged
skin contact. Flush eyes with water for
15 minutes in case of contact. KEEP
OUT OF REACH OF CHILDREN.
For More Technical Information, Click Here to Download the Product Data Bulletin