Specifically designed for outboard motors, Outboard 100:1 Pre-Mix
Synthetic 2-Stroke Oil contains a heavy dose of low-temperature dispersant
additives that excel at reducing varnish and carbon deposit
formation in water-cooled motors. Its low-smoke, low-odor, low-toxicity
properties produce fewer emissions at 100:1 mix ratios than oils
mixed at 50:1, benefitting operators and the environment. Outboard
Synthetic 2-Stroke Oil is formulated to prevent "oil loading" and plug
fouling for rapid throttle response, making it ideal for trolling motors.
Recommended for pre-mix use where TC-W3 is specified.
AMSOIL Synthetic 2-Stroke Oil has been providing improved performance
and protection in two-stroke engines since 1973. Trust the extensive
experience of AMSOIL, The First in Synthetics®, to do the best
job protecting your engine.
Outboard Synthetic 2-Stroke Oil provides premium protection and performance
at 100:1 mix ratios. It is formulated for hot-operating two-stroke outboard motors,
effectively fighting carbon/deposit formation and preventing ring sticking.
Outboard Synthetic 2-Stroke Oil's synthetic formulation burns clean. When mixed
at 100:1, smoke is virtually undetectable. Boaters subjected to smoke and fumes
benefit from these low-emission properties.
- Excellent lubricity and cleanliness
- Controls friction and helps prevent
wear, plug fouling, ring sticking and
exhaust port blocking
- Improves throttle response
- Lowers or eliminates smoke
- Delivers outstanding protection and
performance at lean mix ratios
- Anti-rust formulation counteracts
the damp environments often encountered
in outboard applications
Outboard Synthetic 2-Stroke Oil is specifically designed for
pre-mix water-cooled two-stroke outboard motors, personal
watercraft and jet boats.
Outboard Synthetic 2-Stroke Oil is recommended for 100:1 mix
ratios in normal service. Richer mix ratios may be used where
desired, although certain benefits such as reduced smoke and
deposits may be compromised.
|32:1||4.0 oz.||1 US GAL|
|40:1||3.2 oz.||1 US GAL|
|50:1||2.6 oz.||1 US GAL|
|80:1||1.6 oz.||1 US GAL|
|100:1||1.3 oz.||1 US GAL|
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty.aspx.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended
application and according to the recommendations in the Safety Data Sheet (SDS). An SDS is available online at www.amsoil.com
or upon request at (715) 392-7101. Keep Out of Reach of Children.
|TYPICAL TECHNICAL PROPERTIES|
Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATO)
Viscosity @ 100°C, cSt (ASTM D445)
Viscosity @ 40°C, cSt (ASTM D445)
Viscosity Index (ASTM
Point °C (°F) (ASTM D97)
Point °C (°F) (ASTM D92)
Fire Point °C (°F)