JASO FD, ISO-L-EGD, API TC
While two-stroke engines are widely used in handheld power equipment
due to their high power-to-weight ratio, equipment owners and
operators are faced with exhaust smoke, the task of properly mixing
oil and gas for different equipment manufacturers, and premature wear
and engine failure. AMSOIL SABER® Professional Synthetic 2-Stroke
Oil effectively addresses these issues and more. Specially formulated
for pre-mix, air-cooled applications, it withstands high heat and stress
to protect engines against wear and harmful deposits. SABER Professional
offers outstanding protection and performance at lean mix ratios
referred to as the SABER Ratio™. Using the SABER Ratio eliminates the
need for mixing different ratios for different equipment, while smoke is
virtually undetectable. With AMSOIL SABER Professional, there is no
compromise. It saves time and money while delivering the ultimate convenience
and engine protection.
AMSOIL Synthetic 2-Stroke Oil has been providing improved performance
and protection in two-stroke engines since 1973. Trust the extensive
experience of AMSOIL, The First in Synthetics®, to do the best job
protecting your engine.
SABER Professional has been tested and proven to provide premium protection and
performance at 100:1 mix ratios. It is recommended for any mix ratio up to 100:1.
When tested at half the treat rate for conventional oils (100:1 vs. 50:1), SABER
Professional easily passed the industry-standard lubricity test. SABER Professional
is designed for hot-operating two-stroke engines, effectively fighting carbon/deposit
formation and preventing ring sticking.
SABER Professional's synthetic formulation burns clean, passing the industry-standard
smoke test at the standard rich mix ratio. When mixed at the SABER Ratio, smoke is
virtually undetectable. Equipment operators subjected to smoke and fumes benefit
from these low-emission properties.
SABER Professional provides the additional benefit of fuel stabilization to help prevent
fuel from deteriorating during storage and causing poor engine performance.
There is no need to add an additional fuel stabilizer when putting equipment into
- Excellent lubricity and cleanliness
- Controls friction and helps prevent
wear, plug fouling, ring sticking and
exhaust port blocking
- Smokeless – delivers fewer
emissions at 80:1 and 100:1
- Stabilizes fuel for off-season
- Delivers outstanding protection
and performance at lean mix ratios
- Anti-rust formulation counteracts
the damp environments often
encountered in two-stroke
SABER Professional is specifically designed for handheld
pre-mix two-stroke power equipment including, but not limited
to, chainsaws, trimmers, blowers, brush cutters, edgers and
Use at conventional mix ratios or the SABER® Ratio,™
regardless of the mix ratio specified for the equipment.
For maximum benefit, use the SABER Ratio.
|Conventional||32:1||4.0 OZ||1 U.S. gallon|
|Conventional||40:1||3.2 OZ||1 U.S. gallon|
|Conventional||50:1||2.6 OZ||1 U.S. gallon|
|SABER® Ratio™||80:1||1.6 OZ||1 U.S. gallon|
|SABER® Ratio™||100:1||1.3 OZ||1 U.S. gallon|
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended
application and according to the recommendations in the Material
Safety Data Sheet (MSDS). An MSDS is available via the Internet at www.amsoil.com
or upon request at (715) 392-7101. Keep Out of Reach of Children. Don’t pollute.
Return used oil to collection centers.
For warranty information, visit www.amsoil.com/warranty.aspx.
For detailed typical technical properties, download the product data bulletin.