AMSOIL 15W-40 Synthetic Diesel Oil is the premium choice for API CJ-4
emission-quality diesel oil required by model-year 2007 and newer diesel
engines, as well as older diesel applications (including those equipped
with turbochargers). It delivers extraordinary lubrication in diesel
engines found in commercial, fleet and personal vehicles. Formulated
with the latest additive and synthetic base oil technology, AMSOIL Premium
15W-40 Synthetic Diesel Oil exceeds the higher performance demands
of modern engines. It withstands the stress of heat, soot and
acids to help prevent deposits, corrosion and wear.
AMSOIL, the leader in automotive synthetic lubrication,
produced the world’s first API-qualified synthetic
motor oil in 1972. Trust the extensive experience
of AMSOIL, The First in Synthetics,® to do the
best job protecting your engine.
Meets Emission System
AMSOIL 15W-40 Synthetic Diesel Oil is a low-sulfated ash formulation that meets the
requirements for low-emission quality diesel oil and protects under the most severe
conditions found in modern diesel engines. It is compatible with all exhaust treatment
devices and is designed for engines equipped with diesel particulate filters (DPF).
Extended Drain Performance
AMSOIL Premium 15W-40 Synthetic Diesel Oil can extend drain intervals far beyond
those recommended for conventional petroleum oils. Its unique synthetic formulation
and long-drain additive system (10.4 TBN) deliver superior engine protection, cleanliness
and performance over extended drain intervals. AMSOIL 15W-40 Synthetic
Diesel Oil provides maximum protection for up to 3X the OEM-recommended drain
interval, even further with oil analysis.
Controls Soot-Thickening and Wear
The advanced synthetic base oils in AMSOIL 15W-40 Synthetic Diesel Oil are
naturally resistant to soot contamination and oxidative thickening. That, along with a
heavy fortification of detergent/dispersant additives, keeps soot particles suspended
independently, helping prevent the formation of larger, wear-causing particles.
Viscosity increase is minimized and soot-related wear is controlled.
Superior Shear Stability,
Reduced Oil Consumption
AMSOIL 15W-40 Synthetic Diesel Oil has lower volatility (burn-off) than conventional
petroleum oils, resulting in less oil vapor passing into the combustion chamber,
lowering oil consumption and emissions. Lower volatility helps AMSOIL Premium
Synthetic Diesel Oil retain its viscosity after high-temperature service for continued
Ideal for Fleets
AMSOIL Premium 15W-40 Diesel Oil reduces operating costs
through extended drain intervals. It is engineered for a wide
range of applications, allowing fleet operators to consolidate
engine oil inventories in mixed fleets. In addition, it reduces
downtime through extended drain intervals and improved
costs less per mile than conventional oil
Fleet Savings vs.
Total Lubricant Cost x1
Total Lubricant Cost x50
8 gal x12=96 gal
|AMSOIL Synthetic 15W-40|
8 gal x4=32 gal
|Total Savings With
|Based on 120,000 miles per year with an
OEM-recommended drain interval of
10,000 miles. Does not include labor, filter, or used oil disposal costs,
AMSOIL even more cost effective. Pricing samples are suggested retail, June
AMSOIL Premium CJ-4 Synthetic 15W-40 Diesel Oil is
recommended for diesel engines and, where appropriate, gasoline engines
requiring any of the following
- SAE 15W-40
- API CJ-4, CI-4+, CF, SM
- ACEA E7, E9
- Mack EO-O
- DDC 93K218
- Caterpillar ECF-3, ECF-2, ECF-1a
- Cummins CES 20081
- Volvo VDS-4, VDS-3
- MB 228.31
- MTU Type I, II & 2.1
- MAN 3275, 3575
- JASO DH-2
- Global DHD-1
- Renault RLD-3
AMSOIL 15W-40 Synthetic Diesel Oil is compatible with conventional
and synthetic motor oils. Mixing AMSOIL motor oils
with other oils, however, will shorten the oil life expectancy and
reduce the performance benefits. AMSOIL does not support
extended drain intervals where oils have been mixed.
Aftermarket oil additives are not recommended for use with
AMSOIL motor oils.
AMSOIL Premium CJ-4 15W-40 Synthetic Diesel Oil is recommended
for extended drain intervals in engines that are
unmodified and in good operating condition.
Diesel Engine Service
- Three times (3X) OEM* recommendation, not to exceed
50,000 miles/600 hours or one year, whichever comes first. Drain intervals may
be extended further with oil analysis.
- 2007-2009 Caterpillar C13 and C15 on-highway engines
must follow OEM-recommended drain interval.
- 2007-Present Dodge, Ford and GM light-duty diesel pickups
must follow OEM-recommended drain interval. Drain intervals
may be extended with oil analysis.
Gasoline Engine Service
- Two times (2X) OEM* recommendation, not to exceed 15,000 miles or one
year, whichever comes first.
*Operating conditions and drain intervals for normal and severe service are
defined by the OEM. Refer to your owner’s manual.
Note: Extended drain intervals are not recommended when
using biofuels containing >10% ethanol or 5% biodiesel (B5). Follow OEM drain intervals or extend drain intervals
with oil analysis.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended
application and according to the recommendations in the Material
Safety Data Sheet (MSDS). An MSDS is available via the Internet at www.amsoil.com
or upon request at (715) 392-7101. Keep Out of Reach of Children. Don’t pollute.
Return used oil to collection centers.
For warranty information, visit www.amsoil.com/warranty.aspx.
TYPICAL TECHNICAL PROPERTIES
AMSOIL Premium API CJ-4 Synthetic 15W-40 Diesel Oil (DME)
|Kinematic Viscosity @ 100°C, cSt (ASTM D-445)|
|Kinematic Viscosity @ 40°C, cSt (ASTM D-445)|
|Viscosity Index (ASTM D-2270)|
|CCS Viscosity @ -20°C, cP (ASTM D-5293)|
|Flash Point °C (°F) (ASTM D-92)|
|Fire Point °C (°F) (ASTM D-92)|
|Pour Point °C (°F) (ASTM D-97)|
|Noack Volatility (DIN 51581) 250°C for 1 hour, % weight loss|
|Four-Ball Wear Test @ 40kgf, 75°C, 1200 rpm, 1 hr Scar,mm (ASTM D-4172)|
|Total Base Number|
|High Temperature/High Shear Viscosity, cP (ASTM D5481)|
|Sulfated Ash Content, wt. % |