AMSOIL Synthetic Powershift Transmission Fluids are specifically designed
for high-torque heavy-duty powershift transmissions. Formulated
for extended drain intervals, Powershift Transmission Fluids contain top-quality
synthetic base stocks and a high level of top-quality additives
selected specifically for powershift transmissions. They offer
exceptional transmission friction performance, smooth
brake operation, gear and bearing wear protection and
increased equipment life.
AMSOIL Synthetic Powershift Transmission Fluids are compatible
with common metallic and non-metallic friction materials. Their stable
frictional characteristics help eliminate excessive brake noise and
vibration. Their non-slip friction properties are designed to prevent
clutch slippage, which can cause glazing or friction surface deposits
and material degradation. Powershift Transmission Fluids are formulated
to deliver responsive yet smooth clutch engagements, excellent power
transmission through clutches and synchronizers and superior hydraulic
fluid performance for servo-equipped units.
AMSOIL Synthetic Powershift Transmission Fluids meet the wear requirements of
the Caterpillar TO-4 specification and are formulated for superior shear stability.
This superior shear stability allows Powershift Transmission Fluids to maintain grade
throughout service life, providing long-term protection against equipment wear, even
when equipment is frequently subjected to sustained periods of applied pressure or
high horsepower and high torque.
Superior High- and Low-Temperature Performance
In high temperatures, AMSOIL Synthetic Powershift Transmission Fluids effectively
protect components from wear. Their superior oxidative and thermal stability inhibits
the formation of varnish, deposits and sludge so equipment runs clean. Synthetic
Powershift Transmission Fluids function as heat transfer fluids and help cool hot
running equipment. In low temperatures, Synthetic Powershift Transmission Fluids
flow readily for dependable startup and post-startup protection.
Copper Corrosion, Rust and Foam Inhibition
AMSOIL Synthetic Powershift Transmission Fluids protect equipment from copper
corrosion and rust, even during equipment storage. Synthetic Powershift Transmission
Fluids do not foam in service, protecting equipment from metal-to-metal contact and
AMSOIL SAE 10W (CTG) Synthetic
Powershift Transmission Fluid is Recommended
for Applications Requiring the Following Specifications:
- Allison C-4
- Caterpillar TO-4
- Dana Powershift Transmissions
- Komatsu KES 07.868.1
- ZF TE-ML 03C
- Heavy-duty manual transmission
- Wheel loaders and crawlers
- Backhoe loaders
- Off-road fork trucks
- Harbor handling equipment
- Railway equipment
- Mining equipment
- Road graders
- Commercial marine applications
AMSOIL Synthetic 10W, 30 and 50 Powershift Transmission
Fluids can be used in Caterpillar, Allison, Komatsu, Clark,
Hurth, Borg-Warner, Twin Disc, Voith, ZF, Funk and Brockhouse
powershift-type transmissions and Eaton/Rockwell/Fuller
AMSOIL Synthetic Powershift Transmission Fluids are
fully compatible with other TO-4 fluids used in powershift
applications. To install AMSOIL Synthetic Powershift Transmission
Fluids, drain the fluid in the system, replace the filter
(if so equipped) and install the appropriate Powershift
AMSOIL Synthetic Powershift Transmission Fluids provide
extended service life beyond conventional petroleum fluids if
Synthetic Powershift Transmission Fluids are kept free of dirt
and moisture. Oil analysis is recommended if extending service
intervals beyond equipment manufacturer recommendations.
AMSOIL Synthetic Powershift Transmission Fluids may be used
up to 60,000 miles or one year (whichever comes first) in CD-50
manual transmission applications or as specified by the OEM.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty.
For complete information, visit www.amsoil.com/warranty.aspx.
HEALTH & SAFETY
This product is not expected to cause health concerns when
used for the intended applications and according to the recommendations
in the Safety Data Sheet (SDS). An SDS is available
online at www.amsoil.com or upon request at (715) 392-7101.
Keep Out of Reach of Children.
Typical Technical Properties
SAE 10W Synthetic Powershift Transmission
@ 100° C, cSt (ASTM D445)||7.1|
@ 40° C, cSt (ASTM D445)||40.0|
°C (°F) (ASTM D92)||248
°C (°F) (ASTM D92)||262
°C (°F) (ASTM D97)||-51
|Four Ball Wear
D4172B @ 40 kg. 75°C, 1200 rpm, 1 hour), Scar, mm||0.43|
see SAE 30 and SAE 50 Powershift Transmission Fluid)|
For More Technical Information, Click Here to Download the Product Data Bulletin