Why Clean Your Engine?
Chances are, when your engine
was new it delivered the power and fuel efficiency
it was designed for. But now, as your engine
accumulates miles, things are happening that
are adversely affecting its performance. Slowly
but surely, your engine is gathering harmful
deposits that will eventually cost you money.
Even though you may follow a
routine service schedule, your driving conditions
may be far from routine. Stop and go driving,
prolonged periods of idling, short trips that
don't allow your engine time to warm up, towing
a trailer, the ingestion of airborne dirt, fuel
dilution, water condensation, and oxidized oil
will eventually cause the formation of a thick,
gummy deposit known as sludge. Settling throughout
the engine, sludge will clog oil passages, restricting
the flow of oil to vital engine parts, especially
in the upper valve train areas.
Don't put clean
oil in a dirty engine!
When an engine gets dirty, even
regular oil changes can't help restore its operating
efficiency. The detergen/dispersants in most
conventional engine oils can't handle the abnormal
amounts of contamination found in a "dirty"
engine. The new oil becomes dirty long before
it should, losing much of its ability to lubricate
and protect your engine and actually accelerating
the formation of more sludge and varnish.
In this age of longer recommended drain intervals,
it is especially important to have a clean engine
before changing oil. Using AMSOIL Fast Acting
Engine Flush when you change oil is an excellent
way to guarantee your engine stays clean. It
has special solvents and cleaning agents that
act fast but gently to remove harmful deposits
that can cost you money in excessive fuel consumption
and mechanical repairs.
AMSOIL Engine Flush is especially recommended
for use before changing to AMSOIL Synthetic
Motor Oils, assuring that these super premium
long life oils provide the maximum protection
and service life they are designed to deliver.
The
AMSOIL Formula for Better Engine Performance |
1)
FLUSH: To
quickly clean residual sludge and engine deposits,
AMSOIL Engine Flush is recommended: Change the
oil filter and add the flush (about 10% of the
oil capacity). Do not overfill the crankcase. Idle the engine 15 to 20 minutes,
then immediately drain the old oil and flush.
*Note: Engine Flush is not recommended for use in transmissions, differentials, air-cooled engines, engines that share a common oil sump with the transmission (motorcycles
& ATV's) or engine not equipped with an oil filter.
2)
INSTALL: Remove the old oil filter
and replace it with an AMSOIL Ea Oil
Filter. Ea Oil
Filters feature advanced full synthetic nanofiber technology,
making them the highest efficiency filters that are available
for the auto/light truck market.
3)
POUR: Fill the engine's crankcase
with the AMSOIL Synthetic Motor Oil of the viscosity
grade recommended by your vehicle's manufacturer.
AMSOIL Synthetic Motor Oils are highly resistant
to oxidation and provide exceptional detergent/dispersant
properties, helping keep your engine free of
further sludge and varnish build-up.
4)
CHANGE: Replace your present air
filter with an AMSOIL Ea Air Filter. AMSOIL Ea Air Filters represent a major breakthrough in
filtration technology. The revolutionary nanofiber technology
used in AMSOIL Ea Filters captures more dirt, holds
more dirt and allows better air flow than conventional air filters.
AMSOIL Ea Filters improve engine performance and
help engines last longer.
A clean
engine performs better and lasts longer. Clean
your engine and keep it clean with quality AMSOIL
products.
|