Transmission Fluid Evacuation
Service:
Bulletin
From Filter Manufacturers Council (16k PDF)
ATF and Transmission Filter Change Procedures (45k PDF)
AMSOIL Transmission fluid recommendations for Cars and Light Duty Trucks
PRODUCT DESCRIPTION
AMSOIL Synthetic Fuel Efficient Automatic Transmission Fluid (ATL) is engineered to exceed the requirements of
GM, Ford and Toyota where low-viscosity oil is required.
The highly-specialized properties of this light-bodied fluid
provide outstanding performance without compromising
protection, even in severe operating conditions.
Automatic transmissions have become increasingly
complex as vehicle manufacturers strive to improve efficiency while satisfying consumer demands. Smaller,
smoother-shifting transmissions with longer fluid life capabilities
and heavier load capacities are now standard.
Traditional ATFs, however, are unable to meet these extreme
requirements, and new fluids have emerged with
each new advancement in transmission engineering.
AMSOIL, with its original introduction of a synthetic ATF
in 1980, remains the leader in transmission fluid quality.
AMSOIL Synthetic Fuel Efficient Automatic Transmission Fluid is formulated with the highest-quality components
to exceed the most stringent industry standards.
The quality and performance of AMSOIL Synthetic ATF is
guaranteed.
Fully Fortified
• Anti-wear/extreme-pressure agents—Extend gear life
• Durable friction modifiers—Anti-shudder
• Anti-oxidants—Extend fluid life
• Seal conditioners—Reduce leaks
• Detergents and dispersants—Keep clean and control deposits
• Corrosion inhibitors—Control rust
• Anti-foam agents—Improve hydraulic function
EXCEPTIONAL HOT- AND COLD-TEMPERATURE PERFORMANCE
Thermal Stability – Hot
temperatures are no excuse
for poor reliability. Naturally heat-resistant and
heavily fortified with anti-oxidants, AMSOIL Synthetic Fuel Efficient Automatic Transmission Fluid exceeds the
most demanding oxidation requirements. It delivers
outstanding protection against sludge and varnish
deposits that clog narrow oil passages and contribute
to clutch glazing. AMSOIL Fuel Efficient
ATF protects hot-running transmissions.
Cold-Temperature Fluidity – Cold, thick automatic
transmission fluid lengthens shift times and
reduces energy efficiency (fuel economy). AMSOIL
Synthetic Fuel Efficient ATF is wax-free and delivers
extraordinary cold-flow per formance (<-60°F
pour point). It helps improve shifting response and
energy efficiency while reducing warm-up times.
OUTSTANDING WEAR PROTECTION
Varying speeds and loads causes torque multiplication
and extreme stress on gears and bearings.
To prevent wear damage resulting from insufficient
fluid film, AMSOIL Synthetic Fuel Efficient ATF is formulated with high film strength (shear stability)
and a select anti-wear/extreme-pressure additive
that develops a boundary layer of protection
between metal surfaces. Even though AMSOIL
Synthetic Fuel Efficient Automatic Transmission
Fluid is a low-viscosity, fuel-efficient fluid, it has
demonstrated its ability to protect as well as or
better than higher-viscosity fluids in the most severe
industry tests.
FRICTION DURABILITY
Today’s transmissions are smaller and must withstand
higher horsepower and torque while delivering smoother
shifts, all with longer fluid life recommendations.
AMSOIL Synthetic ATF is formulated with friction modifier
additives that deliver outstanding clutch-holding
capacity (static friction), torque-transfer ability (dynamic
friction) and anti-shudder properties (slipping torqueconverter
clutches).
EXTENDS FLUID SERVICE LIFE
Modern transmissions are smaller in design,
yet are called upon to deliver smoother
shifts and longer fluid-life capabilities
in higher-horsepower and higher-torque
conditions. AMSOIL placed great emphasis
on developing a fluid to effectively address
the complex demands related to
friction. AMSOIL Synthetic Fuel Efficient
Automatic Transmission Fluid delivers outstanding
clutch-holding capacity (static
friction), torque transfer ability (dynamic
friction) and anti-shudder properties (slipping
torque-converter clutches).
APPLICATIONS
AMSOIL Synthetic Fuel Efficient Automatic
Transmission Fluid is recommended
for automatic transmissions and other applications
requiring DEXRON® VI, MERCON® LV, SP or Toyota WS.
AMSOIL Synthetic Fuel Efficient Automatic
Transmission Fluid is backward compatible
and replaces DEXRON® III
fluids in older GM automatic transmissions.
(DEXRON® VI specification supersedes the
obsolete DEXRON® III in GM vehicles.)
*Not for use with CVT or Ford Type F applications.
EXTENDED FLUID SERVICE LIFE
Most drivers are unaware that transmissions commonly
operate under severe service and require shorter fluid
drain intervals. AMSOIL Synthetic Fuel Efficient Automatic
Transmission Fluid is a long-life fluid capable of extended
service intervals. It provides an extra margin of protection,
especially when fluid change intervals are missed or during
heavy use; even during abuse. Drivers can count on
AMSOIL Fuel Efficient ATF to provide protection beyond
conventional fluids.
| SERVICE LIFE |
|
|
| |
Recommendation for cars and light duty trucks |
| Specification |
Normal Service* |
Severe Service* |
| DEXRON® VI |
100,000 miles (160,000 km) |
50,000 miles (80,000 km) |
| MERCON® LV, SP |
Follow vehicle manufacturer's recommendations |
| Toyota WS |
100,000 miles (160,000 km) |
60,000 miles (96,000 km) |
HEALTH &
SAFETY
This product is not expected to cause health
concerns when used for the intended application
and according to the recommendations in the
Material Safety Data Sheet (MSDS). MSDS's are
available upon request at 715-392-7101 or on
our website. Keep Out of Reach of Children. Don't pollute. Return used oil to collection
centers.
TYPICAL
TECHNICAL PROPERTIES |
AMSOIL
Synthetic Fuel Efficient Automatic Transmission
Fluid (ATL) |
Kinematic
Viscosity @ 100°C, cSt (ASTM D-445) |
6.0 |
Kinematic
Viscosity @ 40°C, cSt (ASTM D-445) |
29.8 |
Viscosity
Index (ASTM D-2270) |
153 |
Flash
Point °C (°F) (ASTM D-92) |
226
(439) |
Fire
Point °C (°F) (ASTM D-92) |
244
(471) |
Pour
Point °C (°F) (ASTM D-97) |
-53
(-63) |
Four
Ball Wear Test @ 75°C, 1200 rpm, 40 kg, 1 hr, Scar, mm (ASTM D-4172) |
0.40 |
Brookfield
Viscosity, cP (ASTM D-2983) |
9050 |
Copper Corrosion, 150°C, 3 hr (ASTM D-130) |
1b |
|