|
|
 |
Saber™ Professional
Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)
AMSOIL Saber™ Professional (ATP) is formulated
with exclusive AMSOIL synthetic base oils and
premium additives. Designed for lean mix ratios
in two-cycle motors, Saber 2-Cycle Oil has excellent
lubricity and cleanliness properties to control
friction and prevent wear, plug fouling,
ring sticking and exhaust port blocking. AMSOIL
Synthetic 100:1 2-Cycle Oils have been protecting
and providing improved performance in two-cycle
motors since 1973. ISO-L-EGD, JASO FD, API
TC
Package sizes include:
1.5-oz Pillow Pack
1.5-oz. Pillow Packs (case of 48)
3.5-oz. Bottle
3.5-oz. Bottles (case of 12)
8-oz. Bottle
8-oz. Bottles (case of 12)
1-Quart Bottle
1-Quart Bottles (case of 12)
30-Gallon Drum
55-Gallon Drum
|
|
|
Saber Professional (ATP) is specifically designed for small engines
including, but not limited to, chain saws, lawn equipment, blowers,
chop saws, pumps, scooters and go-carts. It is available in a 3.5-
oz. bilingual (English/Spanish) container which is ideal for treating
the 2 – 2.5-gallon cans of gas commonly used for storing mixed gas
on the job. Saber Professional is also very good for use in motorcycles,
snowmobiles, ATVs, jet boats and personal watercraft.
Saber Professional is formulated with high-temperature detergent
additives to prevent hard carbon deposits from forming in these hot-operating
motors. Saber Professional is “smokeless” and delivers
fewer emissions at 100:1 mix ratios than oils mixed at 50:1.
Equipment operators subjected to smoke and fumes will benefit from
these low emission properties. Because one mix ratio satisfies multiple
pieces of equipment, Saber Professional eliminates mix ratio
confusion. Saber Professional is recommended for pre-mix where
ISO-L-EGD, JASO FD or API TC is specified.
Applications (2-Cycle Recommendations Chart)
AMSOIL Saber 100:1 2-Cycle Oil is recommended
for 100:1 mix ratios in normal service. Richer
mix ratios may be used where desired.
| 2.6 oz. |
per 1 U.S. gallon |
50:1 |
| 8 oz. |
per 5 U.S. gallons |
80:1 |
| 1.3 oz. |
per 1 U.S. gallon |
100:1 |
| 8 oz. |
per 6 U.S. gallons |
100:1 |
TYPICAL
TECHNICAL PROPERTIES
Saber™
Professional Synthetic 100:1 Pre-Mix
2-Cycle Oil (ATP) |
Kinematic
Viscosity @ 100°C, cSt (ASTM D-445) |
13.5 |
Kinematic
Viscosity @ 40°C, cSt (ASTM D-445) |
99 |
Viscosity Index (ASTM
D-2270) |
136 |
Pour
Point °C (°F) (ASTM D-97) |
-36
(-33) |
Flash
Point °C (°F) (ASTM D-92) |
114
(237) |
Fire Point °C (°F)
(ASTM D-92) |
114
(237) |
DANGER: harmful or fatal if swallowed. Contains
synthetic lubricant and petroleum distillates.
If swallowed do not induce vomiting.
Contact a physician immediately. Keep
away from fire, heat and open flame.
Use with adequate ventilation. Avoid
frequent or prolonged skin contact.
Flush eyes with water for 15 minutes
in case of contact. KEEP
OUT OF REACH OF CHILDREN. |
|
|
|
|
|
|
|
PRODUCT LOOKUP GUIDES |
|
FILTER LOOKUP GUIDES |
|
| OIL COMPARISONS |
| |
CROSS REFERENCE GUIDES |
|
| INSTALLATION INFO |
|
|
MISCELLANEOUS |
|
|