|
PRODUCT DESCRIPTION
The Ea By-Pass Oil Filter (EaBP) provides the best possible filtration
protection against wear and oil degradation. Working in conjunction with
the engine’s full-flow oil filter, the AMSOIL Ea By-Pass Filter operates
by filtering oil on a “partial-flow” basis. It draws approximately 10 percent
of the oil pump’s capacity at any one time and traps the extremely
small, wear-causing contaminants that full-flow filters can’t remove. The
AMSOIL Ea Bypass Filter typically filters all the oil in the system several
times an hour, so the engine continuously receives analytically clean oil.
 |
 |
| Sample
Kit |
Size
Measurement |
New Aluminum Billet Oil Fill and Oil Filter Caps for BMK21 By-Pass Filtration System
 AMSOIL offers by-pass components to ease the installation of the BMK21 By-Pass Filtration System in three popular diesel engines: the Ford 6.0L Power Stroke™, the Dodge 5.9L Cummins and the General Motors 6.6L Duramax.
Engine compartments are becoming increasingly cramped, leaving little room for after-market additions and improvements. The BMK21 is a single remote by-pass filter system that fits into much smaller spaces than the AMSOIL Dual-Remote By-Pass System.
Ford 6.0L Power Stroke™ Diesels
To ease installation of the BMK21 on 2003 and later model Ford pickups equipped with the 6.0L Power Stroke™ diesel engine, AMSOIL provides the new Aluminum Billet Oil Filter Cap (BK1101), the Aluminum Billet Oil Fill Cap (BK1102) and the 90-degree JIC Elbow (BP242). These new high-quality billet aluminum caps replace the original equipment manufacturer (OEM) filter cap and oil fill cap. The new caps have holes tapped in them that accept the JIC elbows for hose connectors.
Dodge 5.9L/6.7L Cummins Diesels
To ease installation of the BMK21 in later model Dodge pickups equipped with the 5.9L and 6.7L Cummins
diesel engine, AMSOIL offers the 1/8" NPT - 1/4" JIC
fitting (BP241), the Aluminum Billet Oil Fill Cap for Dodge 5.9L Cummins diesels (BK1301) and the 90-degree JIC Elbow (BP242). The BP241 fits onto the existing plug on top of the OEM full-flow filter mount, and the addition of the BK1301 eases the installation of the oil return line.
General Motors 6.6L Duramax Diesels
To provide GM Duramax owners the same ease of installing the BMK21, AMSOIL is now offering an oil filter “Sandwich” adapter (BK1201).
The Sandwich adapter is an anodized billet aluminum adapter that screws on to the present full flow oil filter nipple located on the engine block. The full flow filter is then simply spun on to the adapter. The Sandwich adapter has an orifice to provide high-pressure oil feed for the BMK21. Like the other diesel applications, AMSOIL now offers an Aluminum Billet Oil Filler Cap for (BK1202) to ease the installation of the oil flow from the BMK11 back to the engine. To complete an installation, the following components must be purchased separately:
1. Aluminum oil filter Sandwich Adapter with o-ring (BK1201)
2. Aluminum Billet Oil Filler Cap for GM Duramax (BK1202)
3. Two 90 degree JIC Elbows (BP242)
4. Single Remote By-pass system (BMK21)
5. By-pass filter (EaBP90, EaBP100, or EaBP110, as space dictates)
|
Higher Efficiency
AMSOIL EaBP Filters have an efficiency of 98.7 percent at two
microns. At normal operating RPMs the EaBP Filter will filter all of
the oil in a typical five quart sump in less than 10 minutes.
Superior Construction
The superior construction of AMSOIL EaBP Filters provides better sealing
and increased longevity along with superior corrosion resistance.
AMSOIL EaBP Filters have a marine powder coated exterior; and
their zinc-dichromate base plates increase rust protection. EaBP
Filters have a nitrile HNBR gasket and an orange silicone anti-drain
valve. The two stage pleated and layered cellulose/full synthetic
media has an efficiency rating of 98.7 percent at two microns.
Longer Lasting
When used in conjunction with AMSOIL motor oil and an AMSOIL EaO
or Donaldson Endurance™ filter, the EaBP should be changed every
other full-flow filter change up to 60,000 miles. When used with
other brands of motor oil or full-flow filters, the EaBP Filter should
be changed every other full-flow filter change. AMSOIL recommends
using oil analysis when extending oil drain intervals.
Increased Oil Capacity
The increased fluid system capacity and filtration
life provides improved oil cooling and ensures that
equipment constantly runs on clean oil. Engine efficiency
is increased, providing extended engine life.
Soot Removal
AMSOIL has designed a high-efficiency
by-pass filter element that is also a soot removal
device. AMSOIL Ea By-Pass Filters use a synthetic/cellulose sandwiched media. The inner
layer of the element is composed of a highly efficient
cellulose media covered with a full synthetic
media outer layer. These filters remove 39 percent
of soot contaminants less than one micron.
Soot removal efficiency increases approximately
10 to 14 percent when the EaBP Filter is used in conjunction with a standard full-flow filter.
By-Pass Filtration Benefits
• Dramatically Extended Drain Intervals
• Improved Oil Cooling
• Increased Filtration Capacity and Life
• Increased Fluid System Capacity
• Efficient Small Particle and Soot Removal
• Significantly Extended Engine Life
• Equipment Constantly Runs on Clean Oil
• Increased Engine Efficiency
• Remove Particles Less Than One Micro
Dual Remote Filter System
The AMSOIL Dual Remote Oil Filtration System
converts an engine’s full-flow oil filter system into
a full-flow/by-pass oil filtration system by attaching
an AMSOIL Full-Flow Oil Filter and AMSOIL
Spin-On By-Pass Oil Filter onto a remote mount.
The Dual Remote System provides superior filtration efficiency, increased oil capacity and
improved oil filtration accessibility. See the G1092 brochure for more info on the Dual Remote Filtration System.
| AMSOIL By-Pass Filter
Replacement Chart |
| Type
of Unit |
Stock
Number |
Size
(Approx.) |
Additional
Oil Needed |
Crankcase
Capacity |
Applications |
| SINGLE
SPIN-ON ELEMENT
(Used with BMK21 or any DUAL REMOTE
SYSTEM) |
EaBP90 |
Diam. = 4.5 in.
Height = 6 in.
With Mnt. = 8 in. |
1 qt. |
up to 9
qt. |
Pleasure
Vehicles, Light Trucks and Smaller Commercial Applications |
| EaBP100 |
Diam. =
4.5 in.
Height = 8 in.
With Mnt. = 10 in. |
1.5 qt. |
up to 15
qt. |
| EaBP110 |
Diam. =
4.5 in.
Height = 10 in.
With Mnt. = 12 in. |
2 qt. |
up to 21
qt. |
| DUAL
SPIN-ON ELEMENT
(Used with BMK22 DUAL-GARD) |
(2) EaBP90 |
Diam. =
5 in.
Height = 5.8 in.
With Mnt. = 8 in. |
2 qt. |
15 to 18
qt. |
Large
Trucks, Construction, Farm and Industrial Equipment
(minimum sump capacity = 15 qt.) |
| (2) EaBP100 |
Diam. =
5 in.
Height = 7.3 in.
With Mnt. = 10 in. |
3 qt. |
15 to 30
qt. |
| (2) EaBP110 |
Diam. =
5 in.
Height = 10.4 in.
With Mnt. = 12 in. |
4 qt. |
15 to 42
qt. |
Normal Service Life b:When used in conjunction with AMSOIL motor oil and an EaO or Donaldson Endurance filter, the EaBP should be changed every other full flow filter change up to 60,000 miles. When used with other brands of motor oil or full flow filters, the EaBP filter should be changed every other full flow filter change. AMSOIL recommends using oil analysis when extending oil drain intervals. |
a. Filters can be used
on sumps of larger capacity but then require more frequent
replacement. Full details on service life included
with filter installation instructions
b. Data determined in
a non-turbo gasoline engine with AMSOIL 100% Synthetic Motor
Oil and AMSOIL Full-Flow Oil Filter. Service life
varies in other engines (turbo and diesel) and with other
oils and filters.
NOTES:
1. Special adapters and hardware may be
required for some installations. A universal mounting bracket
is included with the kit, however, custom brackets may be
required depending on your vehicle's equipment options or
personal preferences in mounting locations."
2. Contact AMSOIL INC. Technical
Service for instructions before installing on vehicles
with cast aluminum oil pans. Or call (715) 399-TECH (8324).
|