|
PRODUCT DESCRIPTION
AMSOIL X-Treme Synthetic
Food Grade Grease is an ultra-premium aluminum
complex grease designed for food service and
pharmaceutical industry equipment where there
is a possibility of incidental contact.
Remains Stable
at Temperature Extremes
This product provides
exceptional performance over a wide temperature
operating range of -35°F to 350°F (up to 400°F
in intermittent use situations), making it suitable
for both hot and cold applications.
Extreme Pressure
Capabilities
AMSOIL X-Treme Synthetic
Food Grade Grease has excellent extreme pressure
capabilities that reduce friction and heat generation
and help eliminate metal-to-metal contact in
processing equipment.
Resists Water
Washout
AMSOIL X-Treme Synthetic
Food Grade Grease resists water washout which
ensures that the grease will stay in place when
exposed to water during washing and rinsing.
It also resists the harmful effects of water,
including rust and corrosion.
Provides
Versatility
Food industry equipment
such as preparation, processing and packaging
machinery requires special greases that must
be both efficient and non-toxic. AMSOIL X-Treme
Synthetic Food Grade Grease is designed with
non-toxic additives to help keep food and pharmaceuticals
safe.
Appearance
This product is an
attractive pure-white color to complement a
hygenic atmosphere which is important in food
processing and pharmaceutical facilities.
APPLICATIONS
AMSOIL X-Treme Synthetic Food-Grade Grease is compatible
with Lithium complex, Calcium 12 hydroxy and
other Aluminum complex greases. It is not compatible
with Barium, Bentonite Clay, Calcium, Calcium complex,
Lithium, Lithium 12 hydroxy, Polyurea or Sodium
greases. If switching from an incompatible grease-type
to AMSOIL X-Treme Synthetic Food-Grade Grease,
complete purging is required.
TYPICAL
TECHNICAL PROPERTIES
|
|
AMSOIL
X-Treme Synthetic Food Grade Grease
|
| Thickener |
Synthetic
Aluminum Complex
|
| National Lubricating
Grease Institute (NLGI) Consistency
Grade |
2
|
| Operating Temperature
Range |
-37°C
(-35°F)
to 204°C (400°F) |
| Penetration (ASTM D-217)
Unworked 25°C (77°F) |
265-295
|
| Dropping Point (ASTM
D-556) |
282°C (540°F) |
| Four Ball Wear Scar
Diameter (ASTM D-2246) 40kgf 1200 rpm,
scar diameter in mm |
0.50
|
| Four Ball EP Test (ASTM
D-2596) weld load kgf |
315
|
| Four Ball EP Test (ASTM
D-2596) Load Wear Index kgf |
41
|
| Low Temperature Torque
(ASTM D-4693) At -40°C, Nm |
0.9
|
| Water Washout (ASTM
D-1264) 80°C, % loss |
1.67
|
| Timken OK Load (ASTM
D-2509) lbs. |
40
|
| High Temperature Life
in Hours (ASTM D-3527) |
60
|
| Rust Prevention (ASTM
D-1743) |
pass
|
|