They draw approximately 10 percent of the oil sump's capacity at any one time and trap the extremely small, wear-causing contaminants that full-flow filters can't remove. AMSOIL Ea Bypass Filters typically filter all of the oil in the system several times an hour, so the engine continuously receives analytically clean oil.
AMSOIL Ea Bypass Filters have an absolute efficiency of 98.7
percent at two microns. This highly efficient filter provides
exceptional filtration performance, removing all the particles
known to reduce engine life.
AMSOIL Ea Bypass Filters have a marine powder-coated
exterior and a zinc-dichromate base plate to provide excellent
corrosion protection. Ea Bypass Filters feature a nitrile HNBR
gasket, an orange silicone anti-drain valve and proprietary
Filter Service Intervals
Ea Bypass Filters offer long service life. Do not exceed the
limits listed in the chart below.
Increased Oil Capacity
The increased fluid system capacity and filtration life provides
improved oil cooling and ensures that equipment constantly
runs on highly filtered oil. Engine efficiency is increased, providing
extended engine life.
AMSOIL has designed a high-efficiency bypass filter element
that is also a soot removal device. AMSOIL Ea Bypass Filters
use proprietary high-efficiency media. This media removes
soot particles two microns and larger, eliminating abrasive
wear from soot agglomeration.
Bypass Filtration Benefits
- Efficient small-particle and soot removal
- Equipment constantly runs on clean oil
- Increased engine efficiency
- Can significantly extend engine life
- Increased filtration capacity and life
- Improved oil cooling
- Increased fluid system capacity
- Dramatically extended drain intervals
AMSOIL Bypass Filter Application Information
(Used with BMK21 or any DUAL REMOTE
|EaBP90||up to 15
Vehicles, Light Trucks and Smaller Commercial Applications|
|EaBP100||up to 18
|EaBP110||up to 24
DUAL SPIN-ON ELEMENT
(Used with BMK22 DUAL-GUARD)
|(2) EaBP90||15 to 30 qt.||Large
Trucks, Construction, Farm and Industrial Equipment|
|(2) EaBP100||15 to 36
|(2) EaBP110||15 to 48
|SPIN-ON ELEMENT (Used with BMK30 Heavy-Duty Bypass System)||EaBP120||24 to 60 qt.||Large Trucks, Construction, Farm and Industrial Equipment|
a. Make sure to check oil level with engine oil dipstick to ensure proper
level. This additional volume is an estimate and should be properly
evaluated using the dipstick.
b. Filters can be used on sumps of larger capacity but may require
more frequent replacement.
Learn more about bypass filtration at www.amsoil.com/bypass.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability
Warranty. For complete information visit www.amsoil.com/warranty.aspx.