- High-load gear and bearing protection
- Long oil and equipment life
- Helps reduce maintenance costs
- Compatible with conventional and synthetic gear lubes
- Multi-functional for multiple applications
APPLICATIONS
AMSOIL 80W-90 Synthetic Gear Lube is recommended for use under various
combinations of high-speed, shock loads, low-speed and high-torque conditions. It is
recommended for use in light- and heavy-duty, automotive, commercial or industrial
applications requiring SAE 80W-90 EP gear lube.
AMSOIL 80W-90 Synthetic Gear Lube replaces conventional 80W-90 gear oils and is
formulated to exceed the lubrication and performance requirements of front and rear
differentials, transfer cases, transaxles, manual transmissions, oil-lubricated wheel
bearings and steering gear boxes that require any of the following specifications:
API GL-5 & MT-1, MIL-PRF-2105E, Dana* SHAES* 234 (formerly Eaton*
PS-037) for 250,000 miles, Mack* GO-J, Arvin/Meritor* O-76D plus hypoid gear
oil specifications from foreign or domestic manufacturers such as GM*, Ford*
and Daimler Chrysler*.
Can also be used in rear axles where API Service GL-4 lubricant is recommended.
For product service
life in differentials, consult your owners
manual or the Original Equipment Manufacturer
(OEM) to establish the application, NORMAL
or SEVERE.
| . | Normal Service | Severe Service |
| Cars, SUVs, Light Trucks | Drain at 100,000 miles
of service or according to the owners
manual, whichever is longer | Drain at 50,000 miles of
service or according to the owners
manual, whichever is longer |
| Heavy Duty Class 8 Line
Haul | Follow the
OEM drain interval (miles or hours) for
synthetic oil up to 250,000 miles or three years,
whichever comes first. |
| Vocational/Delivery | Follow the
OEM drain interval (miles or hours) for
synthetic oil up to 120,000 miles or three years,
whichever comes first. |
| Heavy Duty Off-Road | Follow the
OEM drain interval (miles or hours) for
synthetic oil up to 100,000 miles or two years,
whichever comes first. |
For product service
life in non-differential applications, consult
owners manual or the OEM for either
normal or severe synthetic oil service intervals.
Where service intervals are unavailable, drain
at twice the interval for conventional oil.
Note: AMSOIL does not support extended drain intervals
where water contamination occurs. Check and service the gear
oil frequently when water contamination is possible. Gear oil
should be changed more frequently when operating vehicles or equipment in dusty or dirty conditions unless the gear system
is properly sealed and equipped with membrane-type breathers.
AMSOIL 80W-90 Synthetic Gear Lube is compatible with conventional
and synthetic gear oil. Mixing AMSOIL Synthetic Gear
Lube with other oil, however, will shorten the oil’s life expectancy
and reduce the performance benefits. AMSOIL does not support
extended drain intervals where oils have been mixed.
AMSOIL 80W-90 Synthetic Gear Lube is compatible with most
limited-slip differentials. If limited-slip differential chatter occurs,
add AMSOIL Slip Lock® friction modifier additive.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty.
For complete information visit www.amsoil.com/warranty.aspx.
HEALTH AND SAFETY
This product is not expected to cause health concerns when
used for the intended applications and according to the recommendations
in the Safety Data Sheet (SDS). An SDS is available
online at www.amsoil.com or upon request at (715) 392-7101.
Keep Out of Reach of Children. Recycle used oil and bottle.
