AMSOIL 10W-30/SAE 30 Synthetic Heavy Duty Diesel Oil is formulated
with premium synthetic base oils that exceed both 10W-30
multi-grade and SAE 30 straight-grade viscosity requirements for outstanding
performance in modern and older diesel engines. Unlike
conventional SAE 30 motor oils, AMSOIL Heavy Duty Diesel Oil has
a naturally high viscosity index and does not contain paraffin (wax).
It has a low pour point and qualifies for SAE 10W, making it an all-season
multi-grade lubricant with a wide operating temperature range.
AMSOIL Heavy Duty Diesel Oil is formulated without viscosity index (VI)
improvers. This shear-stable formulation is designed to reduce viscosity
loss and associated bearing and cylinder bore wear. AMSOIL 10W-30/SAE 30 Synthetic Heavy Duty Diesel Oil contains premium additives
with a high 12 TBN to neutralize acids from blow-by, exhaust gas recirculation
(EGR) and high-sulfur diesel fuels. It helps protect against
damaging piston deposits, ring sticking and sludge.
AMSOIL, the leader in automotive synthetic lubrication, produced the
world’s first API qualified synthetic motor oil back in 1972. Trust the extensive
experience of AMSOIL The First in Synthetics® to do the best job
protecting your equipment.
Where these viscosity grades are specified, AMSOIL 10W-30/SAE 30 Synthetic
Diesel Oil provides outstanding performance as a straight-grade SAE 30 for older
two- and four-stroke diesels and as a multi-grade SAE 10W-30 in modern four-stroke
diesel and gasoline engines. AMSOIL Synthetic Heavy Duty Diesel Oil is ideal for
use in a wide variety of light- and heavy-duty applications, including agriculture, offroad
construction, trucking, mining, industrial (pumps and generators) and personal
automotive or commercial transportation. It is recommended for use with low or
high-sulfur diesel fuels in standard, turbocharged or supercharged
engines; all off-road engines and pre-2007 on-road engines.
- SAE 10W-30 performance without VI improvers
- Cost-effective replacement for conventional oils
- Excellent shear stability
- Outstanding wear protection
- Superior protection over a broad range of operating temperatures
- Extended service life
AMSOIL ACD is recommended for diesel engines, gasoline
engines and other applications that require any of the following worldwide specifications:
- API CI-4+/CH-4/SL, CF, CF-2
- Global DHD-1
- ACEA A3/B3, E3, E5
- JASO DH-1
- Mack EO-M, EO-N
- Detroit Diesel 93K214
- Caterpillar ECF-1a, ECF-2
- Cummins CES 20076/20077/20078
- Volvo VDS-3/VDS-2
- Mercedes Benz 228.1/228.3/229.1
- MAN 271/3275
- MTU Type 2
- Ford WSSM2C921-A
AMSOIL ACD is compatible with conventional and synthetic motor oils, however, mixing
AMSOIL ACD with other oils will shorten the oil life expectancy and reduce the performance
benefits. AMSOIL does not support extended drain intervals where AMSOIL ACD has
been mixed with another product.
Aftermarket additives are not recommended for use with AMSOIL ACD.
AMSOIL Synthetic 10W-30/SAE 30 Heavy Duty Diesel Oil (ACD) is recommended
for extended drain intervals in engines that are unmodified and in good operating
Diesel Engine Service
- Three times (3X) OEM* recommendation, not to exceed 50,000 miles/600 hours or one
year, whichever comes first. Drain intervals may be extended further with oil analysis.
Gasoline Engine Service
- Two times (2X) OEM* recommendation, not to exceed 15,000 miles or one year, whichever
*Operating conditions and drain intervals for severe and normal service are defined
by the OEM. Refer to your owner’s manual.
Note: Extended drain intervals are not recommended when using biofuels
containing >10% ethanol or 5% biodiesel (B5). Follow OEM drain intervals or extend
drain intervals with oil analysis.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty.
For complete information, visit www.amsoil.com/warranty.aspx.
HEALTH & SAFETY
This product is not expected to cause health concerns when
used for the intended application and according to the
recommendations in the Safety Data Sheet (SDS). An SDS is
available via the Internet at www.amsoil.com or upon request at
(715) 392-7101. Keep Out of Reach of Children. Don’t pollute.
Return used oil to collection centers.