**NOT AVAILABLE IN CANADA
- Contains additives that specifically protect against corrosion
- Displaces water and seals equipment from water intrusion
- Leaves a dry, long-lasting (up to several years), wax-like amber film
- Sprays into hard-to-reach places
|The three aluminum pieces in the upper left were treated with
Heavy-Duty Metal Protector on their lower halves, while the
three aluminum pieces in the upper right were untreated. The
three steel pieces in the lower left were treated with Heavy-Duty Metal Protector on their lower halves, while the three
steel pieces in the lower right were untreated. Following
treatment, the pieces were placed in a 5 percent saltwater
bath (the same salt and a similar solution to what vehicles and
equipment are exposed to on winter roadways) for one hour,
removed and allowed to dry for 23 hours. This process was
repeated for 10 days. As seen in the pictures, the portions
treated with Heavy-Duty Metal Protector show no signs of
Automotive and trailer undercoat, spare tire carriers, battery terminals,
tailgate hinges, handheld tools, snow plows, mower decks and blades,
snowblowers, skid-steer attachments, farm machinery, fork lifts, metal
gates/fences and much more.
Shake well before use. Clean target area prior to application. Apply in a
uniform and even manner. For precision application, use extension straw.
Allow to dry for two hours. For best results, allow to cure for 12 hours.
Use AMSOIL Heavy-Duty Degreaser to remove overspray.
AMSOIL Heavy-Duty Metal Protector is available in 15-oz. spray cans. It is not available in Canada.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty. For complete information
HEALTH AND SAFETY STATEMENT
This product is not expected to cause health concerns when used for the intended
applications and according to the recommendations in the Safety Data Sheet (SDS).
An SDS is available online at www.amsoil.com or upon request at (715) 392-7101. Keep Out of Reach of Children. Recycle used oil and bottle.