Transmission Fluid Evacuation Service:
Bulletin From Filter Manufacturers Council (16k PDF)
Transmissions in commercial vehicles, SUVs, trucks and vans – particularly
those used for hauling or towing – are subjected to severe-service
operation and increased heat. Elevated temperatures cause fluids to
break down, allowing damaging metal-to-metal contact and the formation
of sludge and deposits. The problem is worse in modern transmissions
with more gears, clutch packs and narrow oil passages that require
clean, high-quality fluid to achieve maximum performance and life.
AMSOIL Signature Series Synthetic Automatic Transmission Fluid is
specifically formulated to withstand the rigors of heavy towing, elevated
temperatures and challenging terrain. It remains fluid in sub-zero temperatures
and provides reserve protection during heavy use and even
Proven in 180,000-mile, Severe-Service Taxi Fleet Field Trial
To demonstrate its effectiveness in severe service, Signature Series Multi-Vehicle
Synthetic ATF was installed in Las Vegas taxi cabs. The vehicles routinely encountered
demanding stop-and-go driving loaded with passengers and cargo, while the
desert environment presented extremely hot ambient temperatures, placing enormous
strain on the fluid. Following 180,000 miles, a transmission was selected for analysis.
The Aluminum Beaker Oxidation Test (ABOT) is an industry standardized test used
to determine a transmission fluid's oxidation resistance, which is a good indicator of
its service life. Testing by an independent, third-party lab revealed that after 180,000
miles in severe service, Signature Series Multi-Vehicle Synthetic ATF resisted oxidation
longer than required for new fluid to meet the Chrysler ATF+4 specification (see
graph). Internal components, including the valve body and clutch plates (pictured),
were virtually free of damaging sludge, deposits and wear, confirming the lubricant's
high level of protection for severe-service applications.
Protects Against Thermal Breakdown
Signature Series Synthetic ATF is formulated with high concentrations of antioxidants,
making it naturally heat resistant. It provides outstanding protection against sludge
and varnish deposits that clog narrow oil passages and contribute to clutch glazing.
After 180,000 miles in severe service, fluid analysis revealed Signature Series Multi-Vehicle Synthetic ATF contained 83 percent of its original oxidation inhibitors, proving
its long-lasting resistance to thermal breakdown.
Outstanding Wear Protection
Varying speeds and loads causes torque multiplication and extreme
stress on gears and bearings. AMSOIL formulated Signature
Series Synthetic ATF with high film strength and premium anti-wear/extreme-pressure additives to help prevent wear during severe
service. In the industry-standard FZG Gear Wear Test, Signature
Series Multi-Vehicle Synthetic ATF that had been used for 180,000
severe-service miles achieved a “Pass” at stage 12 – the highest
stage. The results exceeded the Ford MERCON V and Chrysler
ATF+4 specifications for new fluid, demonstrating the lubricant's
long-lasting wear protection.
Cold, thick automatic transmission fluid lengthens shift times and
reduces fuel economy. Signature Series Synthetic ATF is wax-free
and delivers extraordinary cold-flow properties. It helps improve
shift response, energy efficiency and warm-up times.
Today's transmissions are smaller and must withstand higher horsepower
and torque while delivering smoother shifts, all with longer
fluid life recommendations. AMSOIL Signature Series Synthetic ATF
is formulated with friction modifier additives that deliver outstanding
clutch-holding capacity (static friction), torque-transfer ability
(dynamic friction) and anti-shudder properties (slipping torque-converter
clutches). Analysis reveals that after 180,000 miles in
severe service, Signature Series Multi-Vehicle Synthetic ATF
provides nearly identical friction properties as new fluid for smooth,
AMSOIL Signature Series Multi-Vehicle Synthetic ATF is recommended
for transmissions, hydraulics, power steering systems and
other applications that require any of the following specifications:
Allison C-4, TES-3389; BMW 7045E, 8072B, LA 2634, LT 71141; Chrysler ATF+4*, MOPAR*
ASRC, 68089195AA, 68049954AA; Ford MERCON*, MERCON* V, ESP-M2C166-H, FNR5,
M2C924-A, XL-12; GM DEXRON* II, DEXRON* III, AutoTrak II; Honda/Acura ATF-Z1;
Hyundai/Kia SP-II, SP-III, Red-1; IDEMITSU K17; JASO 1A; JWS 3309, 3314, 3317; MAN 339 Type V-1, 339 Type V-2, 339 Type Z-1, 339 Type Z-2, 339 Type Z-3, 339F; Mazda ATF-M
III, ATF-MV, F-1; Mercedes Benz 236.1, 236.2, 236.3, 236.5, 236.6, 236.7, 236.9, 236.10,
236.11, 236.81, 236.91; Mitsubishi SP-II, SP-III, ATF-J2; Nissan Matic-D, Matic-J, Matic-K,
402; SAAB 3309; Shell 3403, LA 2634; Subaru ATF, ATF-HP; Suzuki 3314, 3317; Texaco ETL-7045E, ETL-8072B, N402; Toyota Type T, T-II, T-III, T-IV; Voith 55.6335, 55.6336; Volvo 97340, 97341; VW/Audi G 052 162, G 052 990, G 055 025; ZF TE-ML 03D, 04D, 05L, 09,
11A, 11B, 14A, 14B, 14C, 16L, 16M, 17C, 20B, 20C, 21L.
Normal Service: Follow the vehicle manufacturer's
normal-service drain interval.
Severe Service: Double the vehicle manufacturer's
severe-service drain interval.
Change at the vehicle manufacturer's recommended drain interval
outside U.S. and Canada.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended
application and according to the recommendations in the Material
Safety Data Sheet (MSDS). An MSDS is available via the Internet at www.amsoil.com
or upon request at (715) 392-7101. Keep Out of Reach of Children. Don’t pollute.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty.aspx.
* All trademarked names and images are the property of their respective owners and may be
registered marks in some countries. No affiliation or endorsement claim, express or implied,
is made by their use. All products advertised here are AMSOIL-engineered for use in the