Answer: AMSOIL products have been available since 1972, when AMSOIL 10W-40 Synthetic Motor Oil became the first synthetic motor oil to meet American Petroleum Institute (API) service
requirements. Today, AMSOIL manufactures synthetic lubricants for virtually all automotive, powersports, commercial and industrial applications.
Becoming an AMSOIL Dealer
Answer: No. Dealers only need to sell if they want to earn commissions and bonuses. Even then, Dealers are encouraged to operate their businesses according to their own goals and schedules;
AMSOIL does not place any pressure on its Dealers to make sales.
Answer: Residual income refers to money earned through indirect involvement. While it is possible to earn residual income as an AMSOIL Dealer, it requires an active group of successful personal
group Dealers. Dealers who register other Dealers and help train them to succeed can continue earning commissions if they fall ill or cannot actively work their Dealerships for another reason. Building a
successful personal group, however, requires a strong commitment to education and training.
Answer: No. Dealers purchase AMSOIL products at wholesale. pricing.
Answer: No. The AMSOIL registration fee is refundable if notification of intent is made to the sponsor or AMSOIL INC. within three days of the date shown on the application. Otherwise, a Dealer
can simply choose not to renew his or her membership.
Synthetic Oil Basics and Switching From Petroleum to Synthetic
Answer: Applications require specific lubricant properties to deliver maximum performance and protection. AMSOIL carefully tailors its synthetic lubricants under the strictest quality control
standards to provide the required properties for the intended application. Mixing AMSOIL synthetic lubricants is not only unnecessary, it may lead to reduced performance and even equipment failure.
Automatic transmission fluids offer a perfect example. Some transmissions require lubricants that contain specific frictional characteristics to reduce, or eliminate, clutch slippage, while other transmissions
may require different frictional requirements. Mixing fluids recommended for different performance specifications may lead to a host of problems, including erratic shifting and transmission failure.
In some applications, mixing lubricants may not lead to equipment failure, but it will reduce performance. For example, if AMSOIL Signature Series 5W-30 Synthetic Motor Oil is installed in a vehicle, and its
owner adds AMSOIL OE Synthetic 5W-30 Motor Oil to top off the engine if Signature Series isn’t available, the vehicle will continue to operate perfectly; Signature Series and OE Synthetic Motor Oil share a
similar chemistry, and formulations of the same viscosity can be safely mixed. However, mixing lubricants will shorten Signature Series' life expectancy and reduce its performance benefits. AMSOIL does not
support extended drain intervals where oils have been mixed.
To minimize the risk of performance- and warranty-related issues due to improper mixing, AMSOIL does not recommend mixing AMSOIL synthetic lubricants.
Answer: Motor oil, whether synthetic or petroleum-based, consists of molecular chains of hydrogen and carbon atoms, referred to as hydrocarbons. Petroleum crude oil is a thick, highly flammable
dark-brown or greenish liquid with high energy density. Many contaminating elements exist in this complex mixture of hydrocarbons, including sulfur, nitrogen, oxygen and metal components such as nickel or
vanadium. Petroleum crude oil is the raw material used for a wide variety of petrochemicals, including solvents, fertilizers, plastics and lubricants.
The oil refining process separates the various types of molecules in the oil by weight, resulting in a concentrated batch suitable for manufacturing products such as gasoline, LPG, kerosene or lubricant base
oils. The chemical composition of conventional motor oil can vary substantially depending on the raw crude oil refining process.
While petroleum base oils are refined, synthetic base oils are manufactured and can achieve a higher performance level. Synthetic oil is chemically engineered for a certain molecular composition with a tailored
and uniform structure. Such fine-tuned control over the final molecular composition of synthetic oils is the key to their superior performance properties. Designing molecular structures in a planned and orderly
fashion results in molecules, and end-products, that are far more stable than their refined petroleum counterparts.
Answer: Most lubricating oils have other chemicals added to improve the overall performance of the fluid. Chemical additives are used to enhance the beneficial properties of the base oil or to
make up for oil deficiencies. For passenger car motor oils, base oil makes up 70 to 80 percent of the final product; the other 20 to 30 percent is comprised of additive chemistry.
Additives help lubricants stand up to extreme operating environments. Even the best base oil would not be able to protect as well against the effects of heat, shearing forces, chemical and water dilution,
corrosion and wear particles. In short, additives make good base oils even better. They give good base oils the performance benefits consumers have come to expect, such as multi-grade performance, extended drain
intervals and extreme-pressure performance.
Anti-wear Agents chemically react to form a film barrier that prevent metal-to-metal contact and wear.
Antioxidants reduce the tendency for oil to react with oxygen and reduce sludge buildup.
Dispersants help suspend and disperse contaminants in the oil to keep engine surfaces free of sludge and deposits. They fight the build-up of corrosive acids and are most efficient at controlling
Detergents help suspend and disperse contaminants in the oil to keep engine surfaces free of sludge and deposits. They are most efficient at controlling high-temperature deposits.
Extreme-Pressure Additives coat metal surfaces to help prevent close-contact components from seizing under extreme pressure. They are activated by high temperatures and high loads to react with
the metal’s surface to form a sacrificial wear layer on components.
Foam Inhibitors reduce the surface tension of air bubbles and causes them to collapse.
Friction Modifiers can be used to give oil more 'slippery' characteristics. In engine oils, friction modifiers are used to increase the oil’s lubricity for the purpose of reducing friction and
improving fuel economy.
Pour Point Depressants give high-viscosity oils good low-temperature properties. Pour point depressant polymers inhibit the formation of crystals to minimize low-temperature viscosity increase.
Rust & Corrosion Inhibitors form a protective barrier over component surfaces to seal out water and contaminants. While most rust and corrosion inhibitors work by forming a physical barrier,
some rust inhibitors function by neutralizing acids.
Viscosity Index (VI) Improvers are long-chain polymers that help control the viscosity of multi-grade engine oils. They expand and contract as temperatures vary. High temperatures cause VI
improvers to expand and reduce oil thinning; low temperatures cause VI improvers to contract and have little impact on oil viscosity.
Answer: Yes. Synthetic oil is perfectly safe for use in both new and high-mileage engines.
Answer: No. AMSOIL synthetic motor oils can be safely used during break-in. In fact, many vehicles, including the Dodge Viper and Chevrolet Corvette, are factory-filled with synthetic oil.
Answer: No matter how well motor oil is formulated, it won’t last forever. As the miles accumulate, motor oil begins to degrade and lose its lubricating effectiveness, while the additives are
depleted. Severe-service driving conditions accelerate this process. Even with little mileage on the oil, oxidation, gases and moisture take their toll and start the degradation process, making it necessary to
set both a mileage and time limit with oil change intervals. Excessive idling, common with fleet vehicles, puts additional stress on the oil, making it necessary to set an hours limit for vehicles subjected to
excessive idling. Motor oil and vehicle manufacturers have developed general recommendations for the maximum amount of time or miles that the oil can be used; typically these intervals fall between 3,000 and
7,500 miles, depending on the type of service.
Many AMSOIL synthetic motor oils are specially formulated for extended drain intervals, providing maximum protection longer than other oils. Check the product data sheet for specific recommendations.
Answer: No. Synthetic oils do not cause engines to leak oil. In fact, AMSOIL synthetic motor oil is fully compatible with modern seal materials and is properly formulated to condition seals,
keeping them pliable to prevent leakage.
Answer: Yes. AMSOIL synthetic motor oils are compatible with other conventional and synthetic motor oils. Mixing other oils with AMSOIL motor oils, however, will shorten the oil’s life expectancy
and reduce its performance benefits. AMSOIL does not support extended drain intervals where oils have been mixed. Mixing other oils with AMSOIL motor oils will also void the AMSOIL limited warranty.
Answer: AMSOIL maintains formulation details as proprietary and does not divulge specifics regarding the type of synthetic base stocks used in its synthetic lubricants. AMSOIL developed the
world’s first API-qualified synthetic motor oil in 1972 and has remained the leader in the synthetic lubricant industry by continually researching new technologies and demanding only the highest-quality raw
materials. As the company moves forward with new technologies it is increasingly more important that this information remains proprietary. AMSOIL views synthetic base oils the same as it views additives, with
each having its own set of unique properties. AMSOIL does not insist on a particular type of base stock, but insists on particular performance parameters. AMSOIL chooses whichever synthetic base stock or
combination of base stocks delivers the desired result and tailors its lubricants to be application-specific (gasoline, diesel, racing, transmission, gear, extended drain, extreme temperatures, etc.). At the end
of the day, the type of base stock used to formulate the oil is inconsequential; the product’s performance is what matters.
Answer: AMSOIL synthetic motor oils are formulated using premium synthetic base oils, and the highest-quality additives, that provide extended-drain capabilities. AMSOIL synthetic motor oils
achieve greater cleaning powers, while providing better equipment protection over longer oil drain intervals. The unique synthetic formulation and robust TBN retention of AMSOIL synthetic motor oils work to
resist oxidation and neutralize the acids that shorten the service lives of other oils. Their characteristic resistance to high-temperature volatility (burn-off) helps reduce oil consumption, while maintaining
viscosity over longer periods of time than other oils. Check the product data sheet for specific recommendations.
Answer: AMSOIL synthetic motor oils can reduce oil consumption in mechanically sound engines. However, AMSOIL synthetic motor oils cannot fix engines that consume oil due to mechanical problems.
Answer: There are no special requirements for changing to AMSOIL synthetic motor oil. However, in older vehicles with high mileage, it may be advisable to use
AMSOIL Engine and Transmission Flush first. This will ensure the engine is clean and free of accumulated contaminants that may affect the
service life of AMSOIL synthetic motor oil. Installation of an AMSOIL Oil Filter at every oil change is also recommended.
Answer: The importance of using good-quality oil in an engine cannot be overstated. AMSOIL synthetic motor oils consistently outperform conventional and other synthetic oils in virtually every
category of performance, including wear protection, extreme high- and low-temperature performance, foam control, viscosity retention, rust and corrosion protection, volatility and fuel economy. While other brands
may provide good performance in some of these areas, AMSOIL synthetic motor oils consistently perform at the top in every category. Drivers can have confidence knowing that AMSOIL synthetic motor oils provide
maximum performance and protection.
Answer: Each vehicle manufacturer defines 'normal' and 'severe' driving conditions for its equipment; AMSOIL recommends owners check these definitions in their owner's manual to determine the
service condition in which they typically drive.
AMSOIL defines normal service as personal vehicles frequently traveling greater than 10 miles (16 km) at a time and not operating under severe service.
AMSOIL defines severe service for gasoline engines as conditions that include commercial or fleet vehicles; excessive idling; or frequent towing, hauling, plowing or driving in dusty conditions.
AMSOIL defines severe service for diesel engines as extensive engine idling, daily short-trip driving less than 10 miles (16km) or frequent dusty-condition driving.
Answer: Absolutely not. Switching from petroleum oil to AMSOIL synthetic motor oil in routinely maintained vehicles will not cause clogged oil filters or passageways, regardless of mileage.
Sludge, which is caused by poor-quality oil and neglected maintenance practices, would have to be present in significant amounts to plug oil filters and passageways. If an excessive amount of sludge is present in
an engine, it is just a matter of time before oil filters and passageways clog, regardless of the installation of AMSOIL synthetic motor oil.
Motor Oil: Gasoline Auto and Light Truck
Answer: We offer a 0W-16 viscosity in our OE Synthetic Motor Oil line, but because the market for 0W-16 oils is limited at this time, we have not added the viscosity to our other lines. We are,
however, always monitoring the demands in each market and will continue to develop products to meet customer needs.
Answer: Yes. Because AMSOIL synthetic motor oils are formulated with premium synthetic base oils, they provide superior high and low-temperature performance. Synthetic oils resist thinning out at
high temperatures to maintain critical protection in extreme heat. They also minimize sludge and deposit formation in high-temperature operation. AMSOIL synthetic motor oils resist thickening in cold temperatures
to provide rapid cold starts and improved low-temperature operation compared to conventional oils.
Answer: A significant portion of an oil's performance and specification compatibility comes from its additive components. AMSOIL offers multiple oils with the same viscosity because they are
formulated with different additive packages that carry different manufacturer oil specifications. This allows AMSOIL to provide premium oil for more equipment manufacturers and industry specifications than would
be possible if only a single viscosity grade was offered.
Answer: AMSOIL OE Synthetic Motor Oil is recommended for vehicle manufacturer-recommended oil change intervals; AMSOIL XL Synthetic Motor Oil is recommended for extended drain intervals of 12,000
miles or a year (whichever comes first) and AMSOIL Signature Series Synthetic Motor Oil is recommended for extended drain intervals of 25,000 miles or one year (whichever comes first). AMSOIL Signature Series
Synthetic Motor Oil is formulated with better base oils and more robust additives, allowing longer extended drains than AMSOIL OE or XL Synthetic Motor Oils.
Answer: AMSOIL Dominator Synthetic Racing Oil is a premium-quality oil formulated for maximum protection in high-performance and racing applications. It is fortified with high levels of zinc and
phosphorus, which are incompatible with catalytic converters common in today’s street-driven vehicles; therefore, Dominator Racing Oil does not carry API service classifications required by many standard
passenger vehicles. However, Dominator Racing Oil is the ideal recommendation for street rods, muscle cars and other high-performance vehicles driven on the street.
Answer: The 'W' in 5W-30 motor oil stands for 'winter' and indicates the oil meets or exceeds certain criteria for good low-temperature performance. Motor oil with SAE viscosity grade 5W-30
behaves like an SAE 30 oil at high temperatures and SAE 5W oil at low temperatures, providing the necessary fluidity for rapid starts and efficient engine operation at low temperatures.
Answer: What may be considered normal oil consumption for one vehicle may be excessive for another. As a rule, the more miles and wear accumulated on an engine, the more oil that engine consumes.
Typically, one quart of oil within 3,000 miles is normal, but it is best to confirm oil consumption limits with the vehicle manufacturer. The following document explains mechanical-related issues that can lead to
oil consumption: Engine Oil Consumption
Motor Oil: Heavy Duty & Off-Road Diesel
Answer: Yes. AMSOIL Engine and Transmission Flush helps restore operating efficiency, increase fuel economy and reduce
emissions in both gasoline and diesel engines and automatic transmissions. Its potent, detergent-based formula dissolves and disperses sludge, varnish and deposits, promoting lower operating temperatures and
reduced oil consumption.
Answer: It depends; some AMSOIL synthetic diesel oils carry gasoline specifications. Check the product data bulletin for specific product and drain interval recommendations.
Answer: Yes, CK-4 oils are backwards-compatible, meaning they can be used in older diesel engines. CK-4 oils are designed as direct replacements for prior-generation oils, including CJ-4 and
Answer: FA-4 oils feature lower viscosity grades and are designed to help next-generation diesel engines maximize fuel economy without sacrificing engine protection. These oils have limited
backward-compatibility because some older engines were not designed to operate with lower viscosity grades. It's up to each engine OEM to determine if FA-4 oils can be used in its engines. Check the owner’s
manual or with the OEM for specific recommendations.
Answer: AMSOIL 5W-40 and 15W-40 diesel oils are multi-grade oils, meaning they provide good performance in high and low temperatures. AMSOIL 5W-40 and 15W-40 both behave like SAE 40 oils in high
temperatures; however, the 5W-40 is thinner than the 15W-40 at start-up and at cold temperatures.
Answer: No, we do not recommend this. Model 2007 and newer diesel engines are fitted with exhaust aftertreatment systems necessary to meet current minimum emissions requirements. API CI-4 and
CI-4+ oils typically contain too much sulfated ash to be compatible with these aftertreatment systems. When in doubt, check the oil specification to determine the suitability of the oil for the intended
application. We recommend using an oil meeting the manufacturer-specified diesel oil specification.
Answer: Yes. During operation the 10W-30 motor oil will perform like SAE 30 motor oil, and it is safe to use in an application requiring straight SAE 30 oil. If starting the small engine in
temperatures below 50°F, the multi-grade oil may improve starting.
Answer: Yes. There are no problems using AMSOIL synthetic 2-stroke oils for break-in periods.
Answer: Wet clutches are immersed in motor oil in order to cool the clutch plates. They are often found in motorcycle applications, and they require fluids with certain frictional requirements to
promote smooth shifting and clutch engagement. Dry clutches require no lubrication.
Answer: Using AMSOIL Saber Professional or Saber Outboard at 100:1 mix ratios, where
50:1 is recommended by the manufacturer, will not void warranties. For more information, contact AMSOIL Technical Services at (715) 399-TECH (8324) or [email protected]
Answer:There should be no need to adjust the carburetor when using AMSOIL Saber Professional, and its use in these applications does not
void the manufacturer warranty. It sounds like too much oil is being mixed with the gasoline, loading up the engines. Saber Professional is recommended for 100:1 mix ratios, ensuring good performance and helping
prevent exhaust valve sticking.
Motor Oil: Motorcycles
Answer: AMSOIL Synthetic V-Twin Primary Fluid is an SAE 50. AMSOIL Synthetic V-Twin Transmission Fluid is similar to a 75W-110.
Answer: For the newer Big Twins, AMSOIL recommends 20W- 50 Synthetic Motorcycle Oil (MCV) in the engine, transmission and primary chaincase. As secondary recommendations, Synthetic V-Twin
Transmission Fluid (MVT) may be used in the transmission, and Synthetic V-Twin Primary Fluid (MVP) may be used in the primary chaincase. In older Harleys such as Knuckleheads, Panheads and Shovelheads, AMSOIL
recommends SAE 60 Synthetic Motorcycle Oil (MCS).
Answer: AMSOIL recommends 20W-50 Synthetic Motorcycle Oil (MCV) for Harley-Davidson Sportster engines, transmissions and primary chaincases.
Answer: Yes. AMSOIL synthetic motorcycle oils meet JASO MA2 friction requirements for use in wet-clutch applications.
Answer: AMSOIL 20W-50 Synthetic Motorcycle Oil is engineered with premium additive packages specifically designed to provide high performance in motorcycle engines, transmissions and primary
chaincases. However, if a customer does not want to use it in all three sumps, AMSOIL Synthetic V-Twin Transmission Fluid (MVT) and
Synthetic V-Twin Primary Fluid (MVP) are secondary recommendations.
Answer: AMSOIL synthetic motorcycle oils are engineered to provide outstanding protection for up to twice the manufacturer’s recommended change interval or one year, whichever comes first. Unless
using an AMSOIL Motorcycle Oil Filter, change the filter based on the manufacturer’s recommended interval. For Big Twin Harley-Davidson
transmissions, follow the Harley-Davidson recommended drain interval for synthetic oil up to 20,000 miles or one year, whichever comes first.
Answer: Yes. In addition to different additive packages, withstanding extreme pressure, protecting against rust and withstanding high temperatures, motorcycle oils must be compatible with wet
clutches. AMSOIL synthetic motorcycle oils are designed to meet the unique frictional requirements necessary for wet-clutch compatibility and provide maximum protection and performance in these applications.
Answer: AMSOIL offers motorcycle oils in different viscosities to accommodate the differences between motorcycle models and manufacturers. Just as in automotive applications, motorcycle engines
require specific oil viscosities for optimal performance and protection based on the components and tolerances in the engine. Check the
AMSOIL Motorcycle Product Lookup for specific recommendations.
Answer: When using it is recommended you follow your vehicle manufacturer’s normal-service drain interval and double the recommended drain interval during conditions of severe-service. Check the
AMSOIL Online Product Application Guide for detailed recommendations.
Answer: No. AMSOIL synthetic transmission fluids are compatible with petroleum and synthetic transmission fluids and can be used to top-off transmission fluid levels. However, when conducting a
transmission fluid change, most of the fluid in the automatic transmission will be replaced with the new fluid.
Answer:AMSOIL Engine and Transmission Flush is recommended for use in automatic transmissions to promote efficient operation
and fuel efficiency. It is not recommended for manual transmissions, CVT transmissions or differentials. AMSOIL recommends the transmission filter be changed when performing a flush.
Synthetic Synchromesh Transmission Fluid is recommended for use up to 50,000 miles, or longer (up to 150,000 miles) as indicated in the owner’s manual. Synthetic Manual Transmission and Transaxle Gear Lube is
engineered to last two times longer than conventional petroleum GL-4 gear oils. Following equipment manufacturer drain intervals for synthetic oils is recommended. Check the
AMSOIL Online Product Application Guide for specific recommendations.
Answer: Yes. AMSOIL Engine and Transmission Flush is compatible with engine and transmission seal materials. It is specially
formulated to condition seals to help prevent leaks and extend seal life.
Answer: Yes. AMSOIL Multi-Vehicle Synthetic Automatic Transmission Fluid is engineered
to provide maximum performance and protection in a number of automatic transmission applications. It is formulated for Mercon V applications and is backward compatible, meaning it is also suitable for Mercon
Answer: No. The Mercon specification precedes the Mercon V specification; therefore, it is not formulated to adequately protect and perform in Mercon V applications. AMSOIL is engineered to
exceed Mercon V and Mercon specifications and can be used in both applications.
Answer: A filter’s micron rating refers to the smallest size contaminant the filter media can remove; however, there is no correlation between micron rating and a filter’s efficiency percentage.
The beta ratio test measures a filter’s efficiency for removing particles of a certain size by comparing the amount of contaminant particles before and after filtration. The number of particles after filtration
is divided by the number before filtration. The resulting number is the beta ratio. AMSOIL filters have a minimum beta ratio of 75, meaning they are capable of removing 98.7% of contaminant particles of a stated
Answer: Yes. In gasoline applications, change the non-AMSOIL brand filter at one year/12,000 miles, whichever comes first, when using AMSOIL XL or Signature Series Motor Oil. In diesel
applications, follow the OEM filter change interval.
Answer: Ea Bypass Filters offer long service life. Do not exceed the limits listed in the chart below.
Answer: No. Filter recommendations by AMSOIL are based on specific equipment manufacturer requirements. Using a filter in an application it is not recommended for will void the filter’s limited
Answer: AMSOIL Bypass Filters are designed to filter out fine particles; they are not meant to extend oil change intervals beyond original recommendations. However, when fine particles are
filtered out of the motor oil, it may be possible to attain longer drain intervals. This should be determined by used oil analysis. In addition, the use of an AMSOIL bypass system may allow for the use of larger
oil filters, which can increase filtering capacity.
Answer: When used in conjunction with an AMSOIL extended-drain motor oil, Ea filters designated with product code EaO are guaranteed for up to 25,000 miles/one year in normal service and up to
15,000 miles/one year in severe service. Ea filters designated with product code Ea15K are guaranteed for up to 15,000 miles/one year, whichever comes first, regardless of driving conditions. It is recommended
that all AMSOIL-brand oil filters be changed when the motor oil is changed. If motor oil other than AMSOIL is used, AMSOIL Oil Filters must be changed according to the vehicle manufacturer’s recommendations.
Fuel Additives: Gasoline
Answer: Yes. AMSOIL fuel additives are compatible. When selecting a fuel additive be sure that it is the appropriate choice for the application. For specific product recommendations, contact
AMSOIL Technical Services at (715) 399-TECH (8324) or [email protected].
Answer: For optimum fuel efficiency and lower emissions, fuel must first be atomized into a fine mist prior to entering the combustion chamber. Over time, injector deposits produce irregular
spray patterns with heavy streams of gasoline that reduce performance, while intake valve deposits also decrease efficiency. AMSOIL P.i. (API) is a potent gasoline additive designed to clean combustion chamber
deposits, intake valve deposits and port fuel injector deposits to improve fuel efficiency up to 5.7 percent and an average of 2.3 percent.
Answer: Yes. AMSOIL Quickshot® (AQS) contains a revolutionary technology that focuses on three major fuel-related issues plaguing small engines and powersports equipment: ethanol, water and dirty
Ethanol in fuel has a tendency to absorb water and separate from the gasoline. It then sinks to the bottom of the gas tank, where it quickly degrades and creates gum, varnish and other insoluble debris that can
plug fuel flow passages and negatively affect engine performance. When this ethanol/water mixture is pulled into the engine, it creates a lean-burn situation that increases combustion chamber temperatures and can
lead to engine damage. AMSOIL Quickshot is proven to successfully fight ethanol problems and improve operation.
Answer: AMSOIL Gasoline Stabilizer (AST) should be used when fuel is stored for long-term, seasonal storage. For short- to medium-term storage, AMSOIL Quickshot® (AQS) is
Fuel Additives: Diesel
Answer: Yes. AMSOIL Diesel Injector Clean (ADF), Cetane Boost (ACB), Diesel Cold Flow (ADF), Diesel All-In-One (ADB) and Diesel Recovery Emergency Fuel Treatment (DRC) are compliant with the
federal requirements for ULSD.
Answer: AMSOIL Diesel Cold Flow (ADD) is designed to prevent fuel from gelling and clogging fuel lines and filters. If the fuel is beginning to gel, the fuel should be treated with AMSOIL Diesel
Recovery Emergency Fuel Treatment (DRC). Diesel Recovery disperses the wax crystals and allows the fuel to flow.
Answer: Elevated cetane levels, generally above 50, are preferable to get the most performance and power out of diesel engines. AMSOIL Cetane Boost (ACB) is engineered to improve the cetane value
of diesel fuel up to seven points. AMSOIL Cetane Boost is appropriate for all types of service, including heavy- and light-duty service, on- and off- road and marine diesel engines. Cetane Boost is compatible
with biodiesel and all types of exhaust emissions systems and is excellent for use with Ultra Low Sulfur Diesel Fuel (ULSD). AMSOIL Cetane Boost also improves operating cost by improving fuel economy, provides
complete combustion for better power, reduces white smoke and emissions, and improves cold temperature starting.
Answer: AMSOIL Diesel All-In-One cleans dirty injectors, lubricates pumps and injectors to reduce wear, extends fuel-filter life, improves fuel economy up to 8%, combats fuel-system corrosion,
prevents wax settling during storage, lowers cold filter-plugging point (CFPP) by up to 40ºF, delivers maximum horsepower and increases cetane up to 4 points. It is safe for use in all diesel fuels, including
biodiesel, and is alcohol-free.
Vehicle Warranty and AMSOIL
Answer: Using AMSOIL synthetic motor oil has no affect on vehicle warranties. A federal law called the Magnuson-Moss Act (1975) prevents original equipment manufacturers from putting conditions
on vehicle warranties attached to any product or service identified by brand, trade or corporate name, unless the manufacturer provides that product or service free of charge. This means consumers have the
freedom to use aftermarket products of their choice without fear of losing the original limited or implied vehicle warranty. For additional information, contact the AMSOIL Technical Department at (715) 399-TECH
(8324) or [email protected].
Answer: No. Extending oil change intervals will not void new vehicle warranties. To affect the vehicle warranty, it must be determined that the lubricant was directly responsible for the failure;
if the oil didn’t cause the problem, the warranty cannot be voided, regardless of brand or length of time in use.
Answer: Yes. AMSOIL provides a limited warranty on all AMSOIL lubricants and filters.
Answer: Call the AMSOIL Technical Department at (715) 399-TECH (8324) with questions or issues regarding warranties.
Because cold-temperature storage can be detrimental to the performance of some AMSOIL products, AMSOIL offers the following storage recommendations:
Lubricants: Store at temperatures at least 10°F above the lubricant's pour point.
Greases: Store in a dry environment at temperatures above freezing (32°F).
Gasoline Additives, Engine and Transmission Flush: No adverse issues with cold-temperature storage.
Diesel Injector Clean, Diesel Cetane Boost, Diesel Recovery: No adverse issues with cold-temperature storage.
Diesel Cold Flow, Diesel All-In-One: Store at temperatures above 0°F.
Brake Fluids: Do not store at temperatures below -40°F for longer than two weeks.
Heavy Duty Metal Protector, Metal Protector, Power Foam, Fogging Oil, Chain Lube, Brake and Parts Cleaner, Firearm Cleaner, Silicone Spray, Spray Grease, Heavy-Duty Degreaser: No adverse
issues with cold-temperature storage as long as products are allowed to warm to room temperature before use.
Miracle Wash®: Store at temperatures above freezing (32°F).
Antifreeze and Engine Coolant: Will not freeze. No adverse issues with cold-temperature storage.
Coolant Boost: Store above 32°F.
Slip Lock®: No adverse issues with cold-temperature storage. If product separates, heat to room temperature and shake well before use.
Answer: ISO International Standards ensure that products and services are safe, reliable and of good quality. For business, they are strategic tools that reduce costs by minimizing waste and
errors and increasing productivity. They help companies access new markets, level the playing field for developing countries and facilitate free and fair global trade.
ISO 9001:2008 is the most widely used quality standard throughout the world for quality management systems. It is based on the eight quality management principles: customer focus; leadership; involvement of
people; process approach; system approach to management; continual improvement and fact-based decision making; and mutually beneficial supplier relationships. When fully adopted, these principles have been proven
to enhance organizational performance in providing quality products and services to customers. For customers and potential industry partners, ISO 9001:2008 certification provides assurance that AMSOIL has systems
in place to ensure consistent product quality on every production run.
ISO 14001:2004 sets out the criteria for an environmental management system. It does not state requirements for environmental performance, but maps out a framework that a company or organization can follow to set
up an effective environmental management system. ISO 14001:2004 certification indicates that AMSOIL takes environmental stewardship seriously and takes deliberate steps to minimizing the company’s environmental
Because its Quality Management and Environmental Management Systems are registered to ISO standards, AMSOIL Dealers and customers can be assured that AMSOIL not only manufacturers high-quality products, but that
the company is also actively monitoring and reducing its environmental impact.
Answer: AMSOIL provides a number of product lookup and filter lookup guides to help determine the appropriate lubricant or filter for an application. These lookup guides are found on the
homepage. The following lookup guides are available to determine proper recommendations: Auto and Light Truck, Motorcycle, ATV, UTV, Snowmobile, Marine Outboard, PWC, Small Engine, Heavy Duty, Vintage Vehicle
Filter Lookup and Master Filter Cross-Reference Guide.
Answer: Oil analysis is a process for determining the chemical properties of a lubricant. It’s often used to detect mechanical issues before major failures occur. Used oil samples are analyzed
for specific physical properties, contaminant levels and wear debris from the equipment to determine if the oil can remain in service. Oil analysis can also monitor the wear rate of the equipment and detect if
wear is elevated beyond acceptable limits. It is often used as part of a preventative maintenance program.
Answer: As part of a preventative maintenance program, oil analysis can help owners and operators be proactive in their maintenance practices to help increase equipment productivity and eliminate
costly downtime. The cost of routine oil analysis far outweighs the costs to replace major equipment on large industrial equipment, commercial and passenger car vehicles.
For those reluctant to extended oil intervals, oil analysis provides evidence that AMSOIL motor oils have exception performance and protection capabilities in extended service.
Answer: Yes. AMSOIL provides oil analysis services through Oil Analyzers Inc. Visit www.oaitesting.com or call (877) 458-3315 for more information.
Answer: Yes. AMSOIL Antifreeze and Engine Coolant (ANT) is compatible with all engine and cooling system components. It surpasses all ASTM standards for metallic corrosion to protect metals and
provide uncompromised cooling protection.
Answer: AMSOIL recommends deionized or distilled water when mixing with AMSOIL Antifreeze and Engine Coolant (ANT). Using deionized or distilled water prevents adding harmful contaminants that
can negatively affect the antifreeze product and cooling system equipment.
Answer: Yes. AMSOIL Antifreeze and Engine Coolant (ANTPC, ANTHD) contains proprietary poly-organic acid technology that is silicate and borate free.
Answer: No, friction modifiers are already built into the SEVERE GEAR formulation.
Answer: No. All gear oils AMSOIL recommends for manual transmission applications are perfectly safe for synchronizer materials.
Answer: AMSOIL automotive gear lubricants have excellent frictional properties and generally will not need to be fortified with additives. If on rare occasions differential chatter occurs, AMSOIL
Slip Lock is recommended.
Answer: AMSOIL gear lubricants are compatible with one another. Mixing different AMSOIL gear lubricants, however, could change the viscosity properties of the oils, depending on the ratios and
viscosities mixed. This could impact the drain interval. Mixing different viscosities of lubricants should be minimized whenever possible.
Answer: No. In most cases, 75W-140 gear lube is too thick to be used in place of 75W-90. For modified or non-stock differentials where a higher viscosity gear lube may be desired, AMSOIL
typically recommends 75W-110. Contact AMSOIL Technical Services for specific recommendations at (715) 399-TECH (8324) or [email protected].
Answer: Yes. As long as temperatures don’t exceed 250°F (121°C), all AMSOIL automotive gear oils are safe to use in drive train applications with yellow metals. Check the AMSOIL on-line look-up
guide at www.amsoil.com for specific questions.
Answer: AMSOIL automotive gear lubricants are compatible with RTV sealant. It is very important the RTV sealant manufacturer’s instructions be followed and the product be FULLY cured before
contact with the gear lubricant.
Answer: Yes. In Evolution 1340 and all Twin Cam Harley-Davidsons, AMSOIL recommends AMSOIL 20W-50 Synthetic Motorcycle Oil (MCV) or Severe Gear 75W-110 Synthetic EP Gear Lube (SVT). In older
Harleys, such as Knuckleheads, Panheads and Shovelheads, AMSOIL Synthetic SAE 60 Motorcycle Oil (MCS) or Severe Gear 75W-140 Synthetic EP Gear Lube (SVO) is recommended.
Answer: AMSOIL automotive gear lubricants are compatible with other synthetic and petroleum based gear lubricants. However, mixing AMSOIL gear oils with oils will shorten the life expectancy and
reduce performance benefits.
Answer: An API (American Petroleum Institute) license indicates that a specific motor oil formulation has passed the minimum performance standards as defined by a series of laboratory bench,
physical, chemical and engine tests. These tests and minimum performance standards are determined by the API Lubricants Committee to address specific areas such as engine wear, deposits, fuel economy and
emissions. The committee is comprised of representatives from automobile, oil and additive companies.
Answer: Additive companies develop licensed formulas that they offer to oil companies to re-license. It is inexpensive to re-license one of these formulas, and the majority of oil companies
choose to do this to avoid the costs associated with testing their own formulas. This lowers the value of such engine oils because the same chemistry is being sold under many brand names. The lubricant formulas
from AMSOIL INC. are unique and proprietary.
Answer: API licensing was originally developed for mineral-based oils, and it affords these oils more flexibility than synthetic oils. Conventional oils comprised of petroleum base stocks may use
a simple program called base stock interchange for added flexibility in manufacturing and purchasing. Interchange means that by completing the proper paperwork and running a few minor tests an oil company can
choose to buy these petroleum base stocks from many different suppliers. This ensures adequate supply and competitive pricing. However, synthetic base stocks are supplier specific and base stock interchange is
not allowed. For example, if a formula was tested with an ester base stock from a specific supplier then only that supplier's ester can be used. Complete engine testing would be required to use that exact same
ester from another supplier and is therefore not performed because of the associated costs. This inflexibility makes price negotiations with synthetic base stock suppliers very difficult and increases business
risk. Supply disruptions from only one source could shut down production.
There is also something called viscosity grade read-across. Fortunately, this applies to both petroleum and synthetic base stocks, although the better cold-temperature performance of synthetics makes it more
difficult to achieve in some situations. The read-across guidelines ensure that if a manufacturer properly formulates the lubricant for which all of the API tests have been performed, then the manufacturer may
use that same basic formula to make more grades (i.e. 5W-20, 5W-30, 10W-30, etc.) of the same motor oil.
Finally, there is a rule for substitutions in the Chemical Manufacturers Association (CMA) code of practice that allows a small degree of flexibility for all formulas. It allows a company to make changes to
certain components in the formula with limited testing and paperwork requirements, provided that the additives are at the same or higher concentration.
Answer: If all AMSOIL motor oils were API licensed, the company could not source new raw materials from multiple suppliers, which would greatly increase the threat of supply disruption and the
likelihood of extraordinarily high prices. To solve this problem, the API must establish base stock interchange guidelines for synthetic base stocks just as they have for other base stocks, as well as develop
interchange guidelines for other components too. Furthermore, licensing formulas limits the ability to quickly adopt new technologies as they are discovered; each variation from the originally licensed formula
requires re-submission for complete engine testing (see the Ask AMSOIL entry above for more information).
Answer: First, AMSOIL INC. works closely with major additive companies to select the top-performing, and usually most expensive, passenger car and heavy-duty diesel motor oil additives. These
additives have already passed all of the API licensing requirements in a petroleum- or synthetic-based formulation. Then, AMSOIL works with the additive company to maximize the amount of additive used and to
boost the additive package in selected performance areas to achieve an optimum performing additive package for the intended application. This is unlike many other oil companies that, because additives are
expensive, use the minimum amount of the least expensive additives required to meet the minimum API requirements.
AMSOIL then uses a combination of synthetic base stocks with known performance characteristics as replacements for the petroleum base stocks to optimize performance in areas of lubricity, volatility, viscosity
index, oxidation and nitration resistance, pour point, flash point, deposit control, soot handling, emissions and many other areas as well. AMSOIL also uses a high-quality V.I. improver with outstanding viscosity
and cleanliness properties. This replaces the inexpensive, low-quality V.I. improver used in standard API-licensed petroleum formulas. AMSOIL does laboratory bench tests and runs field tests to verify the
superiority of the synthetic formula. AMSOIL continues to monitor the performance of the oil through close scrutiny of tens of thousands of oil analysis tests per year across a wide variety of vehicles all around
North America and the world. AMSOIL INC. has been collecting used synthetic oil samples from passenger cars since 1982. No other oil company has such a vast database of the performance of synthetic lubricants
over extended drain intervals. AMSOIL products and formulations outperform API-licensed oils because they are engineered for top performance from the very beginning.
Your browser is outdated.
Thank you for visiting www.amsoil.com. Certain parts of this website may not function with Internet Explorer. To continue shopping with us, please update your browser using one of the options below.