Customer Ratings & Reviews

I have used Amsoil's 2 cycle oil for 16yrs and have been completely satisfied as the smoking of the 2 cycle engines has disappeared as well as allowed for mixing the fuel at leaner rates than the oem suggested rate of 50:1. I now mix at 75-80:1 with no problems all year and even in this brutally cold winter, my 2 cycle gear starts and runs fantastic.

I've used this oil for over 20 years in all my 2-strokes at 100:1. This started out in jet skis, but now includes Kawasaki KDX 220 dirt bike and chainsaws. I love only having one pre-mix gas can, not one for each machine. That way the pre-mix gas always gets used and is fresh. I went from jet skis to using it in my KDX 220 because when I'd ride up to the top of high mountains, (from 1200- 9500 ft.) the oil fouling was impossible due to the increase fuel richness. It wasn't practical to change jets multiple times on the same day. Going to 100:1 eliminated the plug oil fouling. I don't have "spuge" dripping out of my exhaust anymore and used the same plug for over 5 years. I changed it because the gap had widened, not because of carbon buildup. I don't race, but don't joy ride either, and I routinely ride in summertime temps around 105.

I have been using this for over 20 yrs. Like using one product in all my 2 strokes with zero problems. I have used this in 1976 Homelite chainsaw that is still going strong with original engine. Runs like new!

This 2 stroke oil is excellent, sthil saw and weed whacker both start a little easier and run stronger, combustion chamber looks cleaner and newer. Very very happy!

The best Two-Cycle Mix out there. No smoke ,keeps plugs ,exhaust screens clean for less upkeep. Two cycle motors are going to be even harder to use as EPA allows more ethanol in the fuels

I use this product commercially in string trimmers, blowers, and chain saws. We run it at 50:1. (Scared to try at 80 or 100:1). We have not had any engine related problems or carbon issues.

Works good vary convenient

I have a Husky chainsaw and an Echo weed eater, also an Evinrude 65 horse outboard and this stuff runs clean and smooth, consistent results and totally reliable.

I've been using saber for quite some time now, it has never let me down! It is the only pre-mixed I will use in my chainsaws, blowers, trimmers. Also never had any issues with carburetors gumming up! Awesome stuff! Thanks jay

This 2 cycle additive is superb to all others out there. There is truly no smoke from my weed eater, chainsaw or blower. I would definitely recommend this to lawn enthusiasts as myself, or toy lovers if you will.

USE IT IN ALL OF 2 STROKE MOTORS I HAVE, NO SMOKE, HIGHER RPM.

This is all I use this for all 2 stroke lawn equipment.

I am running the Saber in my 2014 KTM 300 xc-w at an 80-1 ratio. It is burning clean and cool with no fouling or exhaust spooge to speak of. I am entertained with all of the folks that say i am going to burn down unless i run 50-1 or 60-1. One more note, I am sensitive to the caustic fumes produced by some oils and do not have any burning eye issues with Saber.

Run a small lawn service started to use amsoil in mower was so happy with the product try the two stroke great only one mix takes care of everything no smoking runs cooler and starts on first pull. Thank you amsoil !!!

Everything about it, says it's the best.

Always been happy with Amsoil products.

I have used the Saber for 6 years. Ratio mixed at 85:1 and performed great with very little smoke. No issues. Highly recommend anyone, especially lawn care guys, to use this as it reduces carbon within the engines.

I use this product mixed at 80:1 in my dirt bike and my lawn equipment which makes it very easy too use and almost no deposits or splooge in my exhaust..used a snap on bore scope and found little to no wear in my dirt bike. Power valves are also clean

Mixes good. And my saw doesn't smoke or have any smell like the other oils make.

I have been using Amsoil Saber in my chainsaws for many years. My saws run cooler with almost no smoke. The only oil I will ever use.