Skip to Main Content
Shop by Vehicle
Open full size product Synthetic Compressor Oil - ISO 46, SAE 20
Roll over image to zoom in
Roll over image to zoom in

AMSOIL ISO 46 100% Synthetic Compressor Oil

Product code : PCIQT-EA

The correct viscosity grade compressor oil is recommended for use in rotary screw, rotary vane, reciprocating and other compressor applications. Compatible with PAO, ester- and petroleum-based compressor oils. Not compatible with glycol- or silicone-based compressor oils.
Warning - Click here for Proposition 65 information for this product

AMSOIL ISO 46 100% Synthetic Compressor Oil



AMSOIL PC Series Synthetic Compressor Oil is a long-life, premium compressor lubricant based on novel, proprietary technology. It incorporates the highest quality, thermally stable synthetics fortified with premium non-detergent additives for maximum protection at high temperatures. It lasts up to 8,000 hours, effectively reducing maintenance and waste oil disposal costs.

Improves Compressor Efficiency
AMSOIL PC Series Oil has low friction properties, resists viscosity increase from oxidation and helps improve operating efficiency.

Controls Foam and Reduces Wear
AMSOIL PC Series Oil contains anti-foam additives and, unlike some other compressor oils, is anti-wear fortified. Good foam control reduces heat, oxidation and wear. High contact regions are protected against wear for increased compressor life and lower maintenance costs.

Resists Water Contamination
Water from condensation builds up in compressors and can cause unwanted oil/water emulsions that lead to rust and corrosion. AMSOIL PC Series Oil is hydrolytically stable. It resists acid formation, readily separates from water and is anti-rust fortified. Water can be easily drained for simplified disposal and increased oil life.

Resists Heat and Oxidation
AMSOIL PC Series Oil combines the inherent stability of premium synthetic base oils with specialized anti-oxidant additives to resist varnish, carbon and acid formation. It is formulated to protect compressors better and last longer in service than petroleum oils, especially during hot operating conditions.

Safety Advantage
AMSOIL PC Series Oil is an ashless, high-flash-point formulation with very low carbon-forming tendencies that minimizes the incidence of ignition-promoting "hot spots." While PC Series Oil can provide improved fire safety, it cannot be considered non-flammable.

Application Recommendations*
AMSOIL PC Series Oil in the appropriate viscosity is recommended for use in single and multistage rotary screw, vane, centrifugal and reciprocating compressor crankcases and cylinders, vacuum pumps, pressure washer pumps and other applications such as gears, bearings, blowers and pumps. In compressor applications, drain intervals of 8,000 hours or more can be expected under normal operation. Drain intervals are subject to operating conditions and maintenance practices. Monitoring by oil analysis is recommended. For best performance when converting to AMSOIL PC Series Oil, it is recommended the compressor be flushed of the old oil and all filters changed prior to the installation of PC Series Oil. If carbon deposits are present on the internal components, it is recommended they be removed following the compressor manufacturer recommendations.

* Consult the equipment manufacturer or AMSOIL Technical Services for use in specific applications.

COMPATIBILITY
AMSOIL PC Series Synthetic Compressor Oil is compatible with petroleum oils and most synthetic oils, seals, paints and materials, including the following:

Gases:
– Nitrogen – Hydrogen – Helium – Carbon Monoxide
– Carbon Dioxide (dry) – Ethylene – Methane
– Propane – Butane – Propylene – Butylenes
– Natural Gas – Benzene – Butadiene
– Furnace (crack gas) – Hydrogen Sulfide (dry)
– Synthetic Gas – Sulfur Dioxide
Paints:
– Epoxy – Oil Resistant Alkyd – Acrylic Enamel
Plastics:
– Acetal (Delrin) – ABS – Phenolic – Polyamide-imide
– Polyamide (Nylon)
– Polycarbonate (metal covered only)
– Polyester – Polyetherimide (Nylon) – Polyimide
– Polyphenylene oxide – Polystyrene – Polysulfone
– PTFE (Teflon) – Terephthalate.
Elastomers:
– Fluoroelastomer (Viton) – Nitrile (Buna N)
– Polyacrylate – TFE/P – Poly Urethane.
Note: Not recommended for "breathing air" or refrigeration compressors. Not recommended for use with polycarbonate plastic that is not metal covered, PVC plastic and butyl, ethylene-propylene or SBR rubber. PC Series Oil is not compatible with polyalkylene glycol or silicone oils.

HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS). An MSDS is available via the Internet at www.amsoil.com or upon request at (715) 392-7101. Keep Out of Reach of Children. Don't pollute.

For warranty information, visit www.amsoil.com/warranty/.

AMSOIL ISO 46 100% Synthetic Compressor Oil

Data Bulletin

Warranty

SDS



AMSOIL ISO 46 100% Synthetic Compressor Oil

  • 5 star rating
    Use Tuthill Blower
    By  TIM,  a  Verified Buyer  from  Texas  on  July 10, 2024
    Used since 2016. Same viscosity as tuthills more expensive oil. Wish it was tinted and not clear to help with checking oil levels in my small sight glasses and came in the quart easy packs like some gear oils do
    Bottom Line
    Yes, I would recommend this to a friend.
    Was this review helpful?
  • 5 star rating
    Good product
    By  PAUL,  a  Verified Buyer  from  Greenville ky.   on  May 29, 2024
    No problems got what I paid for.
    Bottom Line
    Yes, I would recommend this to a friend.
    Was this review helpful?
  • 5 star rating
    MULTIFUNCTIONAL
    By  RONALD,  a  Verified Buyer  from  SOUTH FLORIDA  on  April 18, 2024
    WORKS WELL IN OLDER MACHINES (30 YR OLD CHAMPIONS) EVEN THOUGHT ITS FORMULATED FOR NEWER TECH
    Bottom Line
    Yes, I would recommend this to a friend.
    Was this review helpful?
  • 5 star rating
    Aired Up Needs
    By  GLENN,  a  Verified Buyer  from  Climate controlled basement  on  February 19, 2024
    Faster recovery of air from my 15yr old compressor. I was using just a conventional synthetic. Proper oil now.
    Bottom Line
    Yes, I would recommend this to a friend.
    Was this review helpful?
  • 5 star rating
    Low drag lubrication for newly rebuilt pump.
    By  WES,  a  Verified Buyer  from  Bismarck, ND  on  January 23, 2024
    I used this oil as a wipe-down in newly refinished and dry cylinders in a 2 stage pump. The drag was reduced and almost eliminated. In the crankcase, rod bearings are quiet and the rings are sealing well resulting in fast pressure build even though it is a 20 weight oil. I'm impressed.
    Bottom Line
    Yes, I would recommend this to a friend.
    Was this review helpful?
  • 5 star rating
    Amsoil a fait ses preuves pour moi, rien d'autre ne l'égal !
    By  ERIC,  a  Verified Buyer  from  Québec Canada   on  October 09, 2023
    Que ce soit pour l'industrie ou pour votre machinerie à la maison ou votre voiture, rien n'égale Amsoil, ne vous faite pas avoir avec les marques commerciales qui vous disent 100% synthétique, c'est une pur Arnaque, la vraie de vraie, c'est AMSOIL !!!!!
    Bottom Line
    Yes, I would recommend this to a friend.
    Was this review helpful?
  • 5 star rating
    -
    By  PETER,  a  Verified Buyer  on  September 13, 2023
    -
    Bottom Line
    Yes, I would recommend this to a friend.
    Was this review helpful?
  • 5 star rating
    Simply the Best
    By  GARY R,  a  Verified Buyer  from  Fort Worth Tx  on  July 13, 2023
    Great oil for my Ingersoll Rand compressor and a lot cheaper. Can't go wrong with Amsoil.
    Bottom Line
    Yes, I would recommend this to a friend.
    Was this review helpful?
  • 5 star rating
    Oil
    By  CURTIS,  a  Verified Buyer  on  June 14, 2023
    Great product
    Bottom Line
    Yes, I would recommend this to a friend.
    Was this review helpful?
  • 5 star rating
    Quality Compressor oil
    By  JOHN,  a  Verified Buyer  from  FL  on  January 18, 2023
    Best compressor oil ive used.
    Bottom Line
    Yes, I would recommend this to a friend.
    Was this review helpful?