Oil Change Kits from AMSOIL take the guesswork out of picking the best oil and filter combination for your vehicle.
Plus
Plus
Plus
Plus
Oil Grade: API*
| Viscosity: |
5W-30 (All TEMPS) |
|---|---|
| Capacity: | 6 quarts (with filter). When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level. Top off to proper level as needed. |
| Torque: | 15-25 ft/lbs (Oil Drain Plug) |
1Based on independent testing of AMSOIL Signature Series 0W-20 using the ASTM D6891 standard test.
2Based on independent testing of AMSOIL Signature Series 5W-30 in the GM turbo coking test.
3Based upon independent testing of Mobil 1 Annual Protection Full Synthetic 5W-30 and AMSOIL Signature Series 5W-30 in ASTM D2896. Oils purchased in July 2020.
Retail Price
1Compared to AMSOIL OE Synthetic Motor Oil.
2Normal Service – Up to 20,000 miles (32,000 km) or one year, whichever comes first, in personal vehicles not operating under severe service.
Retail Price
1Based on independent testing of OE 0W-20 in the Peugeot TU3M Wear Test as required by the dexos1 Gen 2 specification.
2Based on zero LSPI events in five consecutive tests of AMSOIL OE 5W-30 Motor Oil in the LSPI engine test required by the GM dexos1 Gen 2 specification.
Retail Price
1Normal Service – Up to 12,000 miles or one year, whichever comes first, in personal vehicles not operating under severe service.
Retail Price
1In accordance with industry-standard ISO SO 4548-12.
Retail Price
Retail Price
No recommendations available
No recommendations available
| Capacity: | With O AC13.3 quarts. |
|---|---|
| Capacity: | With XC14.8 quarts. |
| Capacity: | With AC13.7 quarts. |
Retail Price
Retail Price
For Automatic Transmission: C6....MA5
| Notes: | (1) This specification has been updated from Mercon to Mercon V per TSB 06-14-4 |
|---|---|
| Capacity: | 3 speed C6 Total Fill 11.8 quarts. |
| Capacity: | 5.9 quarts Initial Fill. |
Retail Price
Retail Price
Retail Price
For Automatic Transmission: AOD....MA5
| Notes: | (1) This specification has been updated from Mercon to Mercon V per TSB 06-14-4 |
|---|---|
| Capacity: | 3 quarts Initial Fill. |
| Capacity: | 4 speed AOD Total Fill 12 quarts. |
Retail Price
Retail Price
Retail Price
No recommendations available
No recommendations available
No recommendations available
For Transfer Case: NP208....MLV
| Notes: | (1) This specification has been updated from Motorcraft P/N XL-12 to Mercon LV. |
|---|---|
| Capacity: | NP208 7 pints. |
| Torque: | 30-40 ft/lbs (Transfer Case Drain Plug) |
| Torque: | 30-40 ft/lbs (Transfer Case Fill Plug) |
Retail Price
Retail Price
For Transfer Case: Warner 1345....MLV
| Notes: | (1) This specification has been updated from Motorcraft P/N XL-12 to Mercon LV. |
|---|---|
| Capacity: | Warner 1345 6.3 pints. |
Retail Price
Retail Price
For Transfer Case: Warner 1356....MLV
| Notes: | (1) This specification has been updated from Motorcraft P/N XL-12 to Mercon LV. |
|---|---|
| Capacity: | Warner 1356 4 pints. |
Retail Price
Retail Price
Dana 44....GL-5 All TEMPS....80W-90
| Capacity: | Dana 44 Front 3.6 pints. Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
|---|
Retail Price
Retail Price
Retail Price
Dana 50....GL-5 All TEMPS....80W-90
| Capacity: | Dana 50 Front 3.8 pints. Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
|---|
Retail Price
Retail Price
Retail Price
Dana 60....GL-5 All TEMPS....80W-90
| Capacity: | Dana 60 Front 5.9 pints. Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
|---|
Retail Price
Retail Price
Retail Price
Standard Differential, Dana 60, 61....GL-5 All TEMPS....80W-90
| Capacity: | Dana 60, 61 Rear 5.9 pints. |
|---|
Retail Price
Retail Price
Retail Price
Standard Differential, Dana 70 HD....GL-5 All TEMPS....80W-90
| Capacity: | Dana 70 HD Rear 7.4 pints. |
|---|
Retail Price
Retail Price
Retail Price
Standard Differential, Dana 70-2U....GL-5 All TEMPS....80W-90
| Capacity: | Dana 70-2U Rear 6.6 pints. Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
|---|
Retail Price
Retail Price
Retail Price
Standard Differential, Dana 80....GL-5 All TEMPS....80W-90
| Capacity: | Dana 80 Rear 8.5 pints. Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
|---|---|
| Capacity: | Dana 80 Rear 8.2 pints. |
Retail Price
Retail Price
Retail Price
Standard Differential, Ford 8.8 or 9 RG....GL-5 All TEMPS....80W-90
| Capacity: | Ford 8.8 or 9 RG Rear 5.5 pints. |
|---|
Retail Price
Retail Price
Retail Price
Standard Differential, W/ 8.8 or 9 RG....GL-5 All TEMPS....80W-90
| Capacity: | With 8.8 or 9 RG Rear 5.5 pints. Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
|---|
Retail Price
Retail Price
Retail Price
Limited Slip Differential, Dana 60, 61....GL-5* All TEMPS....80W-90
| Capacity: | Dana 60, 61 Rear 5.9 pints. |
|---|
Retail Price
Retail Price
Retail Price
Limited Slip Differential, Dana 70 HD....GL-5* All TEMPS....80W-90
| Capacity: | Dana 70 HD Rear 7.4 pints. |
|---|
Retail Price
Retail Price
Retail Price
Limited Slip Differential, Dana 70-2U....GL-5* All TEMPS....80W-90
| Capacity: | Dana 70-2U Rear 6.6 pints. Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
|---|
Retail Price
Retail Price
Retail Price
Limited Slip Differential, Dana 80....GL-5* All TEMPS....80W-90
| Capacity: | Dana 80 Rear 8.5 pints. Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
|---|---|
| Capacity: | Dana 80 Rear 8.2 pints. |
Retail Price
Retail Price
Retail Price
Limited Slip Differential, Ford 8.8 or 9 RG....GL-5* All TEMPS....80W-90
| Capacity: | Ford 8.8 or 9 RG Rear 5.5 pints. |
|---|
Retail Price
Retail Price
Retail Price
Limited Slip Differential, W/ 8.8 or 9 RG....GL-5* All TEMPS....80W-90
| Capacity: | With 8.8 or 9 RG Rear 5.5 pints. Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
|---|
Retail Price
Retail Price
Retail Price
Recommended For: HB
| Notes: | (1) Motorcraft High Performance DOT 3 brake fluid, P/N PM-1-C or equivalent meeting Ford specification WSS-M6C65-A1. |
|---|
Retail Price
Recommended For: FA
| Notes: | (1) Automatic Transmission Fluid, Type-F |
|---|
Retail Price
Retail Price
Retail Price
1Based on third-party testing in a 2016 Chevrolet* Silverado* 1500, 5.3L V-8 GDI with 100,616 miles, using one tank treated with AMSOIL P.i. Actual results may vary.
2ASTM D5598(M) – 2013 Buick Regal test vehicle.
Retail Price
Retail Price
Retail Price
Retail Price
Retail Price
Retail Price
Retail Price
Retail Price
Retail Price
**NOT AVAILABLE CALIFORNIA AND NEW JERSEY
Retail Price
Retail Price
Retail Price
Retail Price
Retail Price
Retail Price
Retail Price
Retail Price
AMSOIL synthetic lubricants are the solution for drivers who want the most from their 1983 Ford F250. How good are they? Our synthetic motor oils blow the doors off the highest industry standards.
Protect your Ford F250 in any driving condition with our specially formulated motor oils. Whether it’s extreme temperatures, long commutes, towing, hauling, the added stress of a turbocharger or you’re simply extending the time between oil changes, our motor oils will keep your 1983 Ford F250 protected.
We produce the synthetic motor oil, oil filter, transmission fluid, gear lube and grease for a complete fluid change – everything to keep your Ford F250 running smoothly for the long haul.
AMSOIL products are subjected to rigorous third-party, industry-standard testing so you can rest assured you’re getting maximum protection. Also, check out our customer reviews on amsoil.com to make the best choice for your Ford F250. Hear from more than 6,000 customers who have experienced AMSOIL lubricants.
Using a properly formulated transmission fluid for your Ford F250 can protect your vehicle from costly problems down the road. AMSOIL transmission fluids offer the best protection for your Ford F250, even in the most severe driving conditions. Protect your vehicle’s transmission from wear, sludge and temperature-related problems and drive with confidence.
Shop online and get your products in 3 business days or less. With free shipping on orders over $100, and an average 25% savings for Preferred Customers, shopping online is the fastest way to get AMSOIL products to your doorstep. Becoming a Preferred Customer earns you savings, points on purchases and more. Simply shop amsoil.com and add a P.C. membership to your cart before checking out. You will receive an immediate savings on products for your 1983 Ford F250.
Getting products for your 1983 Ford F250 couldn’t be easier. Find a nearby Independent AMSOIL Dealer or retailer using the AMSOIL Locator.
Specifications contained on this website are based on manufacturers' information and were believed accurate at the time of publication. Our recommendations apply to AMSOIL products only, as we cannot be responsible for products from other manufacturers. Always compare fluids and lubricants that were installed in the vehicle with those replacing them during service. Never install more fluid or lubricant than what is considered adequate according to gradients on dipstick or level of filler hole. Fill and drain locations are for reference only. Failure to perform adequate inspections or obtain proper resolution will limit or negate any liability toward AMSOIL INC. Models introduced midyear may not have the same specifications as those produced earlier.
If any discrepancies are noted, they can be simply reported to AMSOIL by clicking on the "Problem?" link docked to the left. We review all reported problems, if you would like a personal response to the issue you are reporting please enter your email address in the space provided on the form.