Viscosity: |
Below 0 F .5W-30 -23 To -1....10W-30 - The -23 C (-10 F) to -18 C (0 F) recommendation is for vehicles with engine block heater only. Above 10 F .15W-40 |
---|---|
Capacity: | With filter 10 quarts. After refill check oil level. |
Torque: | Oil Drain Plug...44 ft/lbs |
1Based on third-party testing in the Detroit Diesel DD13 Scuffing Test for specification DFS 93K222 using 5W-30 as worst-case representation
Retail Price (USD)
1Based on third-party testing in the Detroit Diesel DD13 Scuffing Test for specification DFS 93K222 using 10W-30 as worst-case representation
Retail Price (USD)
1In accordance with industry-standard ISO SO 4548-12.
Retail Price (USD)
Retail Price (USD)
No recommendations available |
No recommendations available |
Capacity: | Initial fill 24.3 quarts. |
---|
Retail Price (USD)
Retail Price (USD)
Capacity: | 4 speed 46RH Total Fill 10.1 quarts. |
---|---|
Capacity: | 4 quarts Initial Fill. |
Retail Price (USD)
Retail Price (USD)
Capacity: | 4 speed 46RE Total Fill 10.9 quarts. |
---|---|
Capacity: | 4 quarts Initial Fill. |
Retail Price (USD)
Retail Price (USD)
Capacity: | 4 speed 47RH Total Fill 10.9 quarts. |
---|---|
Capacity: | 4 quarts Initial Fill. |
Retail Price (USD)
Retail Price (USD)
Notes: | (1) Mopar part no. 4874459 or equivalent (synthetic) is recommended. |
---|---|
Capacity: | 8 pints. |
Retail Price (USD)
Retail Price (USD)
Capacity: | NP231, 233 2.5 pints. |
---|
Retail Price (USD)
Retail Price (USD)
Capacity: | NP241 4.6 pints. |
---|
Retail Price (USD)
Retail Price (USD)
Capacity: | NP241HD 6.6 pints. |
---|
Retail Price (USD)
Retail Price (USD)
Capacity: | NP231, 233 2.5 pints. |
---|
Retail Price (USD)
Retail Price (USD)
Capacity: | NP241 4.6 pints. |
---|
Retail Price (USD)
Retail Price (USD)
Capacity: | NP241HD 6.6 pints. |
---|
Retail Price (USD)
Retail Price (USD)
Notes: | (1) Dana rear axles with limited slip: Use 0.6 pints of additive in the 80. All others use 0.4 of additive. |
---|---|
Capacity: | 4WD With Dana 60 Rear 7.2 pints. Fill no higher then 3/4 inch below plug hole. |
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Notes: | (1) Dana rear axles with limited slip: Use 0.6 pints of additive in the 80. All others use 0.4 of additive. |
---|---|
Capacity: | 4WD With Dana 70 Rear 7.6 pints. |
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Notes: | (1) Dana rear axles with limited slip: Use 0.6 pints of additive in the 80. All others use 0.4 of additive. |
---|---|
Capacity: | 4WD With Dana 80 Rear 10.1 pints. |
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Notes: | (1) Dana rear axles with limited slip: Use 0.6 pints of additive in the 80. All others use 0.4 of additive. |
---|---|
Capacity: | RWD With Dana 60 Rear 6.3 pints. Fill no higher then 3/4 inch below plug hole. |
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Notes: | (1) Dana rear axles with limited slip: Use 0.6 pints of additive in the 80. All others use 0.4 of additive. |
---|---|
Capacity: | RWD With Dana 70 Rear 7 pints. |
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Notes: | (1) Dana rear axles with limited slip: Use 0.6 pints of additive in the 80. All others use 0.4 of additive. |
---|---|
Capacity: | RWD With Dana 80 Rear 6.8 pints. level in all axles must not come up to the fill plug opening The level must be as follows: With Dana, 3/4 inch (17mm). |
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Capacity: | With Dana 60 Front 6.3 pints. Fill no higher then 1/4 inch below plug hole. |
---|
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Notes: | (1) With controlled slip, add 6.5% Mopar Trac-loc additive or equivalent |
---|---|
Capacity: | 4WD With Dana 60 Rear 7.2 pints. Fill no higher then 3/4 inch below plug hole. |
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Notes: | (1) With controlled slip, add 6.5% Mopar Trac-loc additive or equivalent |
---|---|
Capacity: | 4WD With Dana 70 Rear 7.6 pints. |
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Notes: | (1) With controlled slip, add 6.5% Mopar Trac-loc additive or equivalent |
---|---|
Capacity: | 4WD With Dana 80 Rear 10.1 pints. |
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Notes: | (1) With controlled slip, add 6.5% Mopar Trac-loc additive or equivalent |
---|---|
Capacity: | RWD With Dana 60 Rear 6.3 pints. Fill no higher then 3/4 inch below plug hole. |
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Notes: | (1) With controlled slip, add 6.5% Mopar Trac-loc additive or equivalent |
---|---|
Capacity: | RWD With Dana 70 Rear 7 pints. |
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Notes: | (1) With controlled slip, add 6.5% Mopar Trac-loc additive or equivalent |
---|---|
Capacity: | RWD With Dana 80 Rear 6.8 pints. level in all axles must not come up to the fill plug opening The level must be as follows: With Dana, 3/4 inch (17mm). |
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Notes: | (1) Hydraulic Brake Fluid, DOT 3 P/N 04318080AC, meeting MS-4574 |
---|
Retail Price (USD)
Notes: | (1) Hydraulic Brake Fluid, DOT 3 P/N 04318080AC, meeting MS-4574 |
---|
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
*All trademarked names are the property of their respective owners and may be registered marks in some countries. No affiliation or endorsement claim, express or implied, is made by their use.
1Fuels tested in 2017.
2Based on third-party testing in July 2017 of AMSOIL Diesel All-In-One and Howes Lubricator Diesel Treat using diesel fuel representative of the U.S. marketplace and Howes’ recommended treat ratio for above 0°F (-17.8°C.)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
Retail Price (USD)
AMSOIL synthetic lubricants are the solution for drivers who want the most from their 1995 Dodge RAM 2500 HD PICKUP. How good are they? Our synthetic motor oils blow the doors off the highest industry standards.
Protect your Dodge RAM 2500 HD PICKUP in any driving condition with our specially formulated motor oils. Whether it’s extreme temperatures, long commutes, towing, hauling, the added stress of a turbocharger or you’re simply extending the time between oil changes, our motor oils will keep your 1995 Dodge RAM 2500 HD PICKUP protected.
We produce the synthetic motor oil, oil filter, transmission fluid, gear lube and grease for a complete fluid change – everything to keep your Dodge RAM 2500 HD PICKUP running smoothly for the long haul.
AMSOIL products are subjected to rigorous third-party, industry-standard testing so you can rest assured you’re getting maximum protection. Also, check out our customer reviews on amsoil.com to make the best choice for your Dodge RAM 2500 HD PICKUP. Hear from more than 6,000 customers who have experienced AMSOIL lubricants.
Using a properly formulated transmission fluid for your Dodge RAM 2500 HD PICKUP can protect your vehicle from costly problems down the road. AMSOIL transmission fluids offer the best protection for your Dodge RAM 2500 HD PICKUP, even in the most severe driving conditions. Protect your vehicle’s transmission from wear, sludge and temperature-related problems and drive with confidence.
Shop online and get your products in 3 business days or less. With free shipping on orders over $100, and an average 25% savings for Preferred Customers, shopping online is the fastest way to get AMSOIL products to your doorstep. Becoming a Preferred Customer earns you savings, points on purchases and more. Simply shop amsoil.com and add a P.C. membership to your cart before checking out. You will receive an immediate savings on products for your 1995 Dodge RAM 2500 HD PICKUP.
Getting products for your 1995 Dodge RAM 2500 HD PICKUP couldn’t be easier. Find a nearby Independent AMSOIL Dealer or retailer using the AMSOIL Locator.
Specifications contained on this website are based on manufacturers' information and were believed accurate at the time of publication. Our recommendations apply to AMSOIL products only, as we cannot be responsible for products from other manufacturers. Always compare fluids and lubricants that were installed in the vehicle with those replacing them during service. Never install more fluid or lubricant than what is considered adequate according to gradients on dipstick or level of filler hole. Fill and drain locations are for reference only. Failure to perform adequate inspections or obtain proper resolution will limit or negate any liability toward AMSOIL INC. Models introduced midyear may not have the same specifications as those produced earlier.
If any discrepancies are noted, they can be simply reported to AMSOIL by clicking on the "Problem?" link docked to the left. We review all reported problems, if you would like a personal response to the issue you are reporting please enter your email address in the space provided on the form.